Wild Dog Adventure Riding

Technical Section => Make / Model Specific Discussions => Suzuki DR & DRZ => Topic started by: Frannarossi on April 14, 2014, 04:00:47 pm

Title: DRZ 400 Clutch shaft seal
Post by: Frannarossi on April 14, 2014, 04:00:47 pm
Where can I buy one of these seals?
Title: Re: DRZ 400 Clutch shaft seal
Post by: Dux on April 14, 2014, 09:13:28 pm
Seal size 10 x 20 x 7 , available at any Bearing Man
Title: Re: DRZ 400 Clutch shaft seal
Post by: Frannarossi on April 15, 2014, 07:28:50 am
Thanks a lot! :thumleft:
Title: Re: DRZ 400 Clutch shaft seal
Post by: Frannarossi on April 28, 2014, 03:45:43 pm
The 20x10x7 size isn't the right one.I bought two,fitted the first one and it lasted for 150 kms and started leaking again.I sanded the second one down to a 6 and fitted it yesterday.Will see what it does.....The original size is actually a 20x10x6.
Title: Re: DRZ 400 Clutch shaft seal
Post by: Dux on April 28, 2014, 03:49:35 pm
The 10x20x7 is what is recommended in the Suzuki microfiche , is there any wear on the shaft or any sharp lips that can cut the seal a bit further down the shaft .
Title: Re: DRZ 400 Clutch shaft seal
Post by: Frannarossi on April 28, 2014, 04:35:55 pm
Nothing,but the original seal seals on the bottom and the seal I bought from bearing man seals on the top....The 7 makes it stand out about 1 mm,so if it gives me shit again,I'll try the original seal from Suzuki.