Wild Dog Adventure Riding

General => General Bike Related Banter => Topic started by: Coxwain on August 10, 2017, 07:36:10 am

Title: Eish.....What to do .....what to do
Post by: Coxwain on August 10, 2017, 07:36:10 am
I've been bike less for a few months now , and I have the itch again .....in fact its become a full blown rash.
I went to look at a 2002 BMW 1150 GS last week. The bike is a code 3. Apparently it was dropped and sustain ed minor cosmetic damage and was written off by the insurance company . The bike was bought back and repaired and looks in reasonably good condition . It has 78000 km on the clock , which for a pig is considered low milage.
So here is the dilemma
It needs a bit of work.
Front brake disks will need to be replaced as they have too much float in them. (They rattle)
Throttle bodies bushings will need to be done .....they have the dreaded ..tikking noise.
Battery is FUBAR....needs to be replaced.
Tyres need to be replaced.
There is no tool box under the rear seat.
The front beak dosnt quite line up with the tank which means the front carrier bracket is slightly bent.

But for the rest ....the bike is in good condition.
The guy will take R37k for it.
DEAL.......OR.......NO DEAL.....
What say the experts ????
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 10, 2017, 07:56:49 am
For a code 3, needing ANY work, I would be looking for a better deal. You can pick up an immaculate R1150GS in the R45K which needs nothing doing and nothing spending. As an aside, that tool tray and tool kit will set you back around R1k secondhand.  8) 
Title: Re: Eish.....What to do .....what to do
Post by: Lem on August 10, 2017, 08:00:15 am
For a code 3, needing ANY work, I would be looking for a better deal. You can pick up an immaculate R1150GS in the R45K which needs nothing doing and nothing spending. As an aside, that tool tray and tool kit will set you back around R1k secondhand.  8)

+1  :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 10, 2017, 08:08:55 am
Its the cost of the front discs im worried about ....those puppies dont come cheap. :-\
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 10, 2017, 08:17:05 am
Its the cost of the front discs im worried about ....those puppies dont come cheap. :-\

For Brembo discs about R2000 a pop, for OEM double that, EBC and others a few hundred cheaper.  :snorting: :snorting:
Title: Re: Eish.....What to do .....what to do
Post by: GregOnGS on August 10, 2017, 08:18:09 am
Its the cost of the front discs im worried about ....those puppies dont come cheap. :-\

The way you describe it, I'd say it's worth about R28k - R30k, my 2c.
When you say full blown rash, a certain reddish bike comes to mind...
Title: Re: Eish.....What to do .....what to do
Post by: ETS on August 10, 2017, 08:36:09 am
No deal. Run.
Title: Re: Eish.....What to do .....what to do
Post by: WheelieDog on August 10, 2017, 08:39:18 am
A code 3 bike will always have a stigma and is worth less for this reason.

It also sounds like this one has not been treated with much TLC as the faults have not been repaired by the owner. He doesn't sound like someone too worried about maintenance. You have spotted the more obvious faults but it's the hidden faults that would concern me.

I also think your rash would be better treated by the application of a bike seat on a different bike, or possibly this one @ 20% less than asking. I am in agreement with Welsh, and he has a wealth of knowledge about Pigs.
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 10, 2017, 08:57:47 am
Its the cost of the front discs im worried about ....those puppies dont come cheap. :-\

The way you describe it, I'd say it's worth about R28k - R30k, my 2c.
When you say full blown rash, a certain reddish bike comes to mind...

Eh .....You be nice ...hear  :biggrin: :biggrin: :biggrin:
Yep....that's the way I see it ...R30ish would be the right price. Problem is ...the seller a'int budging and there aren't many decent Pigs around for sale. :-\
Title: Re: Eish.....What to do .....what to do
Post by: Straatkat on August 10, 2017, 09:07:05 am
Patience Coxwain, the right bike will come along....it always does. You are probably going to kick yourself down the line if you buy this one just because you had a fire in your belly.
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 10, 2017, 09:09:37 am
Patience Coxwain, the right bike will come along....it always does. You are probably going to kick yourself down the line if you buy this one just because you had a fire in your belly.

Its not "The fire in my belly" .....its the straining in my pants  ;)
Title: Re: Eish.....What to do .....what to do
Post by: iamgigglz on August 10, 2017, 09:16:02 am
After a brief attempt at getting my Code 3 Transalp back on the road I learnt that a crashed bike always hides niggles. Replace the brake disks and you'll find the bearings are stuffed. Replace the bearings and notice the axle isn't straight... Not necessarily mechanically accurate but you get what I mean.

As Welsh says, for a lot less effort you can pick up a non-crashed bike for not much more than it costs to buy+fix the code 3.
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 10, 2017, 09:21:38 am
After a brief attempt at getting my Code 3 Transalp back on the road I learnt that a crashed bike always hides niggles. Replace the brake disks and you'll find the bearings are stuffed. Replace the bearings and notice the axle isn't straight... Not necessarily mechanically accurate but you get what I mean.

As Welsh says, for a lot less effort you can pick up a non-crashed bike for not much more than it costs to buy+fix the code 3.

Thanks guys for all the good advise so far. :thumleft: :thumleft:
I also need to mention, that the bike is perfectly ride able and has a current road worthy certificate.  :-\ :-\ :-\ :-\
Title: Re: Eish.....What to do .....what to do
Post by: King Louis on August 10, 2017, 09:23:37 am
Sounds like a no deal to me. Wait........
Title: Re: Eish.....What to do .....what to do
Post by: sidetrack on August 10, 2017, 09:30:57 am
Those parts listed sound more serious than a "dropped" bike, more like pretty big crash. I would pass.
Title: Re: Eish.....What to do .....what to do
Post by: capeklr on August 10, 2017, 10:34:38 am
I don't know the 1150's, but I find it strange that the throttle body bushes are worn at a low 78000 km's.
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 10, 2017, 10:54:19 am
I don't know the 1150's, but I find it strange that the throttle body bushes are worn at a low 78000 km's.

No they can be, particularly is the throttle bodies are not balanced regularly.  8)
Title: Re: Eish.....What to do .....what to do
Post by: captain jack on August 10, 2017, 02:58:28 pm
way too much for that bike
Title: Re: Eish.....What to do .....what to do
Post by: Omninorm on August 10, 2017, 03:45:11 pm
Don't buy a Code3 anything and save yourself hassles.
Unless you are looking for an excuse to be permanently cured from bikes. Then buy it.
Title: Re: Eish.....What to do .....what to do
Post by: Weedkiller - Adie on August 10, 2017, 05:40:32 pm
Demmit, as julle hom nie wil he kan ek hom vat.

As die rem skywe nog binne spec is press ons die 'rivits' net en alles is weer reg en doodstil.  >:D

Adie
Title: Re: Eish.....What to do .....what to do
Post by: 4xFord on August 10, 2017, 08:20:22 pm
I'm with the no deal clan on this.
Rather wait a while or buy something else.
The right bike will find you.

Sent from my SM-G950F using Tapatalk

Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 20, 2017, 08:43:47 pm
So against all the good advise I got .....I went with Adie on this one and pulled the trigger. Im now the proud owner of another pig.
I ended up paying R35k which I think is reasonably fair. I will start another tread on the rehabilitation of of this bike. It should prove to be quite interesting.
So ....wish me luck guys I sincerely hope I havent bought a lemon.
Im picking her up next week ...so pic on the way.
Title: Re: Eish.....What to do .....what to do
Post by: eberhard on August 20, 2017, 09:05:04 pm
.
Title: Re: Eish.....What to do .....what to do
Post by: dirt rat on August 21, 2017, 06:27:34 am
Front disks should not need replacing at that mileage - measure the thickness to see whether they are out of speck.
Ticking noise could also be the left cam chain tensioner - there is a upgrade available.
My gs at 227000km has original throttle bodies.
Take the bike to a good mechanic and do a proper service - Replace all oil and brake fluids and balance throttle bodies and check valve clearances.
Prepare yourself for gearbox bearings- swingarm bearings and final drive bearings.
Good to see you back on the Pig- happy days.
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 21, 2017, 07:47:24 am
Front disks should not need replacing at that mileage - measure the thickness to see whether they are out of speck.
Ticking noise could also be the left cam chain tensioner - there is a upgrade available.
My gs at 227000km has original throttle bodies.
Take the bike to a good mechanic and do a proper service - Replace all oil and brake fluids and balance throttle bodies and check valve clearances.
Prepare yourself for gearbox bearings- swingarm bearings and final drive bearings.
Good to see you back on the Pig- happy days.

Gearbox bearings and seals relatively cheap and not difficult to do, just lots of labour.  :biggrin: :biggrin:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 21, 2017, 07:58:10 am
Yep ....I know.....been there , done that. :biggrin:  I still have you on speed dial Mr Welsh..
But hey ....c'mom guys ....lets give the old girl some credit , she might be a diamond in the rough.

Heres hoping.... O0
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 21, 2017, 08:04:28 am
Front disks should not need replacing at that mileage - measure the thickness to see whether they are out of speck.
Ticking noise could also be the left cam chain tensioner - there is a upgrade available.
My gs at 227000km has original throttle bodies.
Take the bike to a good mechanic and do a proper service - Replace all oil and brake fluids and balance throttle bodies and check valve clearances.
Prepare yourself for gearbox bearings- swingarm bearings and final drive bearings.
Good to see you back on the Pig- happy days.

Yep ....thats the first thing that gonna happen ....all fluids and filters will be replaced. Dammmm I wish I hadn't given all my special Pig tools away when I sold my last one. But hey ....you live and learn.
Title: Re: Eish.....What to do .....what to do
Post by: aka.Goliath on August 21, 2017, 08:15:19 am
Congratulations.  I have just done pretty much the same thing. Wonderful learning curve sorting out this one.

 (https://uploads.tapatalk-cdn.com/20170821/5991f91d12fa6219a260e33654e42491.jpg)

Finished stripping her yesterday. Off with the suspension today.
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 21, 2017, 08:26:56 am
Front disks should not need replacing at that mileage - measure the thickness to see whether they are out of speck.
Ticking noise could also be the left cam chain tensioner - there is a upgrade available.
My gs at 227000km has original throttle bodies.
Take the bike to a good mechanic and do a proper service - Replace all oil and brake fluids and balance throttle bodies and check valve clearances.
Prepare yourself for gearbox bearings- swingarm bearings and final drive bearings.
Good to see you back on the Pig- happy days.


Yep ....thats the first thing that gonna happen ....all fluids and filters will be replaced. Dammmm I wish I hadn't given all my special Pig tools away when I sold my last one. But hey ....you live and learn.

If it was me, I would have an overview, any rubbers, parts, gear linkage seals etc needed immediately? and place an order with Motorworks with a full service kit.   8)
Title: Re: Eish.....What to do .....what to do
Post by: dirt rat on August 21, 2017, 08:33:44 am
Please stay away from pink paint.
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 21, 2017, 08:40:21 am
IT WAS RED .....GODDAMMIT.... :imaposer:
And anyways .....I have reformed myself ......I have stopped ........washing bikes in the dark :biggrin: :biggrin:
Title: Re: Eish.....What to do .....what to do
Post by: dirt rat on August 21, 2017, 08:56:59 am
Ja well no fine !
Title: Re: Eish.....What to do .....what to do
Post by: Buddy on August 21, 2017, 10:06:23 am

I would stop using Mr Min as well, they can be confusing even in the light.
Title: Re: Eish.....What to do .....what to do
Post by: luv2ride on August 21, 2017, 11:09:02 am
Good luck, hoping it is not a lemon :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 21, 2017, 02:26:52 pm
Nah ...it cant be a lemon .......Its got a Harley Conversion ....... :biggrin: :biggrin: :biggrin: :biggrin:
Title: Re: Eish.....What to do .....what to do
Post by: ChrisL - DUSTRIDERS on August 21, 2017, 02:34:24 pm
Nah ...it cant be a lemon .......Its got a Harley Conversion ....... :biggrin: :biggrin: :biggrin: :biggrin:

That motor looks good in there. :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: Weedkiller - Adie on August 21, 2017, 03:18:41 pm
Ooohhh ja, ek het gelees daar was samewerking tussen BMW en Harley.  Die Harley's wou nie so lekker om die draaie en die BMW het nie genoeg vibreer.  :pot:

Adie
Title: Re: Eish.....What to do .....what to do
Post by: heinzz on August 21, 2017, 03:20:23 pm
Nah ...it cant be a lemon .......Its got a Harley Conversion ....... :biggrin: :biggrin: :biggrin: :biggrin:

That motor looks good in there. :thumleft:
Looks very, very good :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: MellowJo on August 23, 2017, 03:36:51 pm
Hi Cox, glad you are back in the doghouse, on a bike     :ricky:

IMHO Front discs rattle is not the disc, but the rim wearing away where the discs move due to heat.
 I just fit a set of SS fender washers between the rim and the disc to take care of that. It offsets the disc by a mm but that is still fine.

Shout if you need pictures.
Title: Re: Eish.....What to do .....what to do
Post by: Ragbert on August 23, 2017, 04:05:48 pm
Hey Brian, happy miles and enjoy sorting out the niggles. Luckily there's water restrictions in the good old Cape, washing your bike can be postponed with good reason!

Sent from my SM-G920F using Tapatalk

Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 24, 2017, 09:28:45 pm
So she's home ....picked her up in Durbanville yesterday and rode her home in the rain.  >:(....not that I'm complaining mind you).
No issues that I can hear ....She runs true and straight so there's nothing bent, and she feels planted and steady. I took her up to 160 km/h with no issues so I'm happy there are no handling issues. Her engine sounds a bit rattily but I'm sure a tappet set and throttle body balance will sort that out. Gear box feels good (It has the normal agricultural clunkiness of the 1150) and the clutch is fine. She started with one prod of the starter and the previous owner told me she hadn't run in two weeks, he had'nt  charged the battery in that time, so I think the battery issue is a non issue.
I measured the front rotor thickness when I got home and they are definitely in spec ....so Mellow Jo ...I think you are right ...a set of 1mm stainless steel washers should sort out the floating disc problem.
Last night I whipped off the tank, to check the state of the wiring. As I expected the insulation of the loom is in a shocking state. I don't know why BMW uses such crap. I peeled away all the old perished rubber and will replace it with self vulcanising tape and that twirly plastic stuff. the actual wiring is in good nick.
The rest of the bike is in pretty good nick and every thing works. The road worthy had been done and I registered her in my name with no issues. I must say ...a more honest seller you could not find. He also threw an Airhawk 2 Seat and a set of braided brake hoses into the deal. So I'm pretty chuffed so far. :biggrin:   
   
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 24, 2017, 09:40:00 pm
The top box and handle bar bag were part of the deal .....and the oil leak in the first Pic is from my wife's car.
I also discovered that the bent front carrier frame is in fact not bent ....the poor alignment of the beak and tank was caused by someone not fitting the rubber connecting strips properly.  :biggrin:

So at the end of the day , all this pig needs is a rear tool kit, a dammm good service and the wiring loom tarted up a bit.   
Title: Re: Eish.....What to do .....what to do
Post by: ChrisL - DUSTRIDERS on August 24, 2017, 10:42:21 pm
That bike is a beaut!!!! Love the Mandarin colour. :drif:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 24, 2017, 10:48:00 pm
The amazing thing is .....nobody wanted it because it is a Code 3
Title: Re: Eish.....What to do .....what to do
Post by: dirt rat on August 25, 2017, 06:04:11 am
Very nice Coxwain- single spark with Gsa screen- also needs de cat and pipe.
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 25, 2017, 07:23:34 am
Yep.....the de cat and pipe will happen some time.
Anyone know where I can find an exhaust "Y" piece?
Title: Re: Eish.....What to do .....what to do
Post by: dirt rat on August 25, 2017, 07:32:17 am
Try Andrew King (Kingtek) 0218014323. I think Scorch and Powerflow in Natal somewhere.
It seems as if that bike has been well cared for judging from the photos.
Title: Re: Eish.....What to do .....what to do
Post by: Weedkiller - Adie on August 25, 2017, 08:25:51 am
Jy sien, ek moes hom maar gevat het.  >:D

Mag jy baia vreugdevolle kilometers op hom ry.

Adie
Title: Re: Eish.....What to do .....what to do
Post by: DirtRebell on August 25, 2017, 08:40:38 am
Congrats Cox.
She looks in great condition. What's the odo on?
Title: Re: Eish.....What to do .....what to do
Post by: GregOnGS on August 25, 2017, 11:11:30 am
I don't know why BMW uses such crap. 

I think they never anticipated how long these models would last
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 25, 2017, 11:34:56 am
Yep.....the de cat and pipe will happen some time.
Anyone know where I can find an exhaust "Y" piece?

I like the Powerflow, it uses the same mounting points as the stock Cat, it doesn't just hang off the headers.  8)
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 25, 2017, 11:47:27 am
So she's home ....picked her up in Durbanville yesterday and rode her home in the rain.  >:(....not that I'm complaining mind you).
No issues that I can hear ....She runs true and straight so there's nothing bent, and she feels planted and steady. I took her up to 160 km/h with no issues so I'm happy there are no handling issues. Her engine sounds a bit rattily but I'm sure a tappet set and throttle body balance will sort that out. Gear box feels good (It has the normal agricultural clunkiness of the 1150) and the clutch is fine. She started with one prod of the starter and the previous owner told me she hadn't run in two weeks, he had'nt  charged the battery in that time, so I think the battery issue is a non issue.
I measured the front rotor thickness when I got home and they are definitely in spec ....so Mellow Jo ...I think you are right ...a set of 1mm stainless steel washers should sort out the floating disc problem.
Last night I whipped off the tank, to check the state of the wiring. As I expected the insulation of the loom is in a shocking state. I don't know why BMW uses such crap. I peeled away all the old perished rubber and will replace it with self vulcanising tape and that twirly plastic stuff. the actual wiring is in good nick.
The rest of the bike is in pretty good nick and every thing works. The road worthy had been done and I registered her in my name with no issues. I must say ...a more honest seller you could not find. He also threw an Airhawk 2 Seat and a set of braided brake hoses into the deal. So I'm pretty chuffed so far. :biggrin:   
   

Bike and particularly the seats look nice, we were all a bit negative about the code 3, we hadn't seen pics and the blinder was the twisted front end which wasnt ::) 8) .

Coxwain, I tried the self vulcanizing tape route, its a kark idea, you tend to pull the loom due to the nature of the tape and its extremely difficult to get a good even finish.

I stripped mine and used proper wiring loom fabric tape, its much easier to get a good even finish and you dont tend to pull on the loom so much. 
Title: Re: Eish.....What to do .....what to do
Post by: Pistonpete on August 25, 2017, 11:50:49 am
Congrats on the new scoot...miles 'o smiles!  :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: steveindar on August 25, 2017, 11:59:11 am
Nice! I like the yellow ones....coz I also have a yellow one. Frankly yours at 70+k  looks a corker. And the price...well..
Title: Re: Eish.....What to do .....what to do
Post by: Buddy on August 25, 2017, 04:27:12 pm

Enjoy, and stay away from cleaning the bike after a few dops on a dark night.
Title: Re: Eish.....What to do .....what to do
Post by: luv2ride on August 25, 2017, 04:39:25 pm
Bike is looking good, hope you have many trouble free miles
Title: Re: Eish.....What to do .....what to do
Post by: katana on August 25, 2017, 04:57:50 pm
Nice one.  Now we will wait for the ride report.   ;D
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 25, 2017, 05:08:14 pm
Congrats Cox.
She looks in great condition. What's the odo on?

odo on 79 k / km
Title: Re: Eish.....What to do .....what to do
Post by: Mayhem on August 25, 2017, 07:11:40 pm
Hi Brian, glad to see you are on a descent bike again. I have a mate who has a "Y" piece for you, he wants R 500 for it if you are interested. I'm in the Congo at the moment and hope to be home in 2 weeks, I'll call you when I get home. Hope you have many safe and happy travels on this old girl
Title: Re: Eish.....What to do .....what to do
Post by: SmuGS on August 25, 2017, 07:42:08 pm
Awesome man, seems you hit a bargain there. . :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: Ri on August 25, 2017, 08:10:20 pm
Great - awesome bike, that colour is nice and loud... BTW you still said we'll do a ride to Kaaimansgat  :ricky:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 26, 2017, 07:28:53 am
Hi Brian, glad to see you are on a descent bike again. I have a mate who has a "Y" piece for you, he wants R 500 for it if you are interested. I'm in the Congo at the moment and hope to be home in 2 weeks, I'll call you when I get home. Hope you have many safe and happy travels on this old girl
Hi Dennis ...will definately take the Y piece if it is still available . :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 26, 2017, 07:30:34 am
Great - awesome bike, that colour is nice and loud... BTW you still said we'll do a ride to Kaaimansgat  :ricky:
Hi Ri .....just say when ... :biggrin: :biggrin:
Will give you a call.. :thumleft:
Title: Re: Eish.....What to do .....what to do
Post by: Ri on August 26, 2017, 11:56:12 am
Great - awesome bike, that colour is nice and loud... BTW you still said we'll do a ride to Kaaimansgat  :ricky:
Hi Ri .....just say when ... :biggrin: :biggrin:
Will give you a call.. :thumleft:
Cool! I'm on vacation for the month of September if you have a weekday free :thumleft:
After that it's juggling weekends again :-/
Title: Re: Eish.....What to do .....what to do
Post by: NoRush on August 27, 2017, 10:03:41 am
Congrats Coxwain, many happy & safe kilo's.  :ricky:
Title: Re: Eish.....What to do .....what to do
Post by: billy-joe on August 29, 2017, 09:38:08 am
Congrats Cox!  now you have to change your avatar signature, you've found another pig!
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on August 29, 2017, 01:02:57 pm
Coxswain, I have not been riding mine much lately,  but this week the cage is in for some panel work, due to the wife not me, so I have been commuting (10 km) on the pig, the old girl can still be a hooligan machine. 😎😎
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 30, 2017, 07:27:20 pm
Ok ...so an update
Put a few Km on the new Pig and found the flaws
1) The beak is as floppy as hell .......fixed ....Mambat's  famous beak hooks sorted that problem out.
2) Gear Box bearings ...Yep ... the gearbox bearings are shot , which means , I have to go in deep and dirty  8)....Welsh ...Keep your phone on  8)
Other than that ...the old girl pulls like a beast.
So ....stay tuned for another gear box over haul post  :biggrin:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on August 30, 2017, 09:30:52 pm
The answer to the "Floppy Beak Syndrome".....Do this and you will never worry about buying another front carrier frame again.
Yes ...when those dammed tabs break off ....and they will ..just make two of these simple hooks and fit them where the tabs used to be. No welding needed , just hook them under the carrier frame and bolt em up tight.
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on September 05, 2017, 07:53:38 am
Follow the further adventures of "Coxwains BARGAIN buy" in the BMW 1150 board.... :-\ :-\ :'(


http://www.wilddog.za.net/forum/index.php?topic=214691.0
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on September 05, 2017, 08:08:40 am
Follow the further adventures of "Coxwains BARGAIN buy" in the BMW 1150 board.... :-\ :-\ :'(

I don't see it?  :biggrin:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on September 05, 2017, 08:15:36 am
Follow the further adventures of "Coxwains BARGAIN buy" in the BMW 1150 board.... :-\ :-\ :'(

I don't see it?  :biggrin:

Wait ....its coming ....Im busy ...Im busy
Eish ....some mothers sons  :snorting: >:( :biggrin:

Dammmm..... now Ive just lost the new post .....I hate working on a tablet...
Title: Re: Eish.....What to do .....what to do
Post by: Welsh on September 05, 2017, 08:16:37 am
Follow the further adventures of "Coxwains BARGAIN buy" in the BMW 1150 board.... :-\ :-\ :'(

I don't see it?  :biggrin:

Wait ....its coming ....Im busy ...Im busy
Eish ....some mothers sons  :snorting: >:( :biggrin:

Any spray painting involved? >:D :biggrin:
Title: Re: Eish.....What to do .....what to do
Post by: Coxwain on September 05, 2017, 08:21:09 am
NO.....its just after eight in the morning ....the spray painting happens at night ....which reminds me , I need to pop into my local Tops....its going to be a long night.

Now can I get back to my other post...