Welcome, Guest. Please Login or Register

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Charlie Echo

Pages: [1] 2
1
BMW 1100/1150/ADV / Re: Dogs with Pigs in the Western Cape
« on: June 07, 2018, 08:14:22 pm »
Thanks guys,

I joined the forum. See you there Chris.


2
BMW 1100/1150/ADV / Dogs with Pigs in the Western Cape
« on: June 05, 2018, 05:07:36 pm »
I would like to get in touch with all the 1150 riders in the WC. Is there such a group already?

If not can we start one pls?

3
Att all CT "varkies"

Shall we arrange a get together in CT sometime?

4
BMW 1100/1150/ADV / Re: 2017 South Side 1100/1150 Gathering
« on: January 01, 2017, 06:22:12 am »
Lyk meer vir my soos n leivoor ;)

5
BMW 1100/1150/ADV / Re: Help wanted Nose cone collapse
« on: December 30, 2016, 01:03:45 pm »
I have found out it is called the front neck frame assembly. The lugg has broken off. I took it to Donfords this morning and they agree with you that the bike must have been in an accident.

There are two options, repair weld, or get another one.

All the guys in CT are on holiday, so I have to wait for the new year to get it done

6
BMW 1100/1150/ADV / WANTED Front neck frame assembly
« on: December 30, 2016, 08:36:24 am »
I rode over a pretty bad corrugated road and I sam my screen and instrument panel take on a rather peculiar angle away from me. There was also this noise of something scraping against the wheel.

Upon further inspection I saw that the fitting that secures the bar supporting the entire nose cone had collapsed.

We used two belts tied around the nose and handle bars and came home.

It appears to be an aluminium casting that has broken, and needs to be repaired. I cannot replace it as the VIN plate is attached to it

Any suggestions will be wellcome, I am in Cape Town

7
BMW 1100/1150/ADV / Re: Help wanted 1150 GS Vibration
« on: November 28, 2016, 07:38:48 am »
Thanks guys

It gives me a good conversation topic with the engineer   :)

8
BMW 1100/1150/ADV / Help wanted 1150 GS Vibration
« on: November 27, 2016, 02:12:14 pm »
I noticed a high frequency vibration developing around 4000 RPM, which is very noticeable in the footpegs. The vibration seems to be directly proportional to RPM.

My Varkie is a 1999 model, and she has 160 000 km on the clock, and in very good condition. I am the third or fourth owner, and she seems to have been looked after.

I would like to gather information about possible causes before I take it to a workshop in Cape Town.

Thanking you in advance

9
and first weekend in November. Its already getting a little hot but not as bad as Dec/Jan/Feb

10
In my opinion Gariep is the best venue. in the centre of SA with plenty accomodation.

11
Aviation Board / Re: All drones banned!!!!
« on: May 18, 2015, 01:21:17 pm »
From the Regulating authority's perspective (read CAA), the advance in technology has caught them a little off-guard, but they need to regulate it as there has been a few close calls with aircraft and choppers, and they cannot allow the situation to escalate. The "ban" is to give them a little breathing space to get the regulations in place, which is a fairly lengthy and laborious process

12
Yah yah Kevin. Only you would see that.
That was a battery on the front tyre sensor that failed into the trip. Was also 2 bar before its battery vreked.
So now I will replace it in this week and all well.

Both of mine has vrekked (2008 GS). I replaced the batteries but still nothing. Any suggestions will be highly appreciated otherwise its off to BMW that is prepared to deliver the hurt to the tune of R4700.00

13
Aviation Board / Re: Farking awesome
« on: April 18, 2014, 08:41:08 pm »
Unless of course he was doing a GNSS approach, in which case he is forgiven

14
Aviation Board / Re: Farking awesome
« on: April 18, 2014, 08:39:21 pm »
Going IMC with some serious Cumulus Granatus up ahead!! Sheer stupidity.

15
BMW 1200/ADV / Re: Reflective stickers
« on: May 11, 2013, 03:06:08 pm »
Got to add that I would like two stickers for the sides of the top box and two chevrons for the pillars, unless you have made a smaller size that would fit below the lock, even better!!

16
BMW 1200/ADV / Re: Aftermarket Screen
« on: May 11, 2013, 02:52:13 pm »
I have a Kappa high screen if you are interested

17
BMW 1200/ADV / Re: Reflective stickers
« on: May 11, 2013, 02:50:25 pm »
Hi Henk,

I would like a set for my top box please. Let me know when you are going to cut the next batch.
Thanks

18
BMW 1200/ADV / Re: gsa windscreen support on a gs
« on: April 15, 2013, 10:17:00 pm »
ACME het definitief eenmaar hy is gebuig. Nuwe een my BMW is R2400.00. Ek het een gekry deur 'n pel

19
New Member Introductions / Re: New Doggie
« on: January 18, 2013, 03:55:54 pm »
Thanks fellows. I am. Have got 65 litres of milk in the fridge ans 120 HALF loaves of bread in the bin. Getting discount at the shop already :imaposer:

Bike is an ABSOLUTE BEAUTY.

Regards

20
New Member Introductions / New Doggie
« on: January 15, 2013, 08:46:13 pm »
Hi to all Dawgs (and Dawgettes?)
Been on the forum for a while. Rode a 650 GS for a few months, sold it and went "underground". Just aquired a stunning 1200 GS, courtesy of Capt. Jack, and looking forward to long hours perusing all the delicacies this site has to offer.
Happy riding, regards,
G

Pages: [1] 2