LC/LCA Rotational handlebar raisers now in stock at Flying Brick

[zebra - Flying Brick]

Hi

The BMW 1200 LC and BMW 1200 LCA (K50 & K51 respectively) have thicker handlebars than their predecessors, so Rox-style raisers were not fitting.

We have just had 5 sets of rotational risers manufactured from BILLET Aluminium (polished), for the 1200 LC and 1200 LCA.
They retail for R859 per set.
Pictures attached.
Cheers
Chris & Team

[Edd]

Hi Zebra, what is the height of the risers>

[zebra - Flying Brick]

Hi Zebra, what is the height of the risers>

approx 55mm centre-to-centre

Thanks
Chris & Team

[Beebop]

Hi Zebra, what is the height of the risers>

approx 55cm centre-to-centre

Thanks
Chris & Team

WOW, half a meter ?
Sounds like ape hangers to me ..  

[zebra - Flying Brick]

Hi Zebra, what is the height of the risers>

approx 55cm centre-to-centre

Thanks
Chris & Team

WOW, half a meter ?
Sounds like ape hangers to me ..  

er, make that MILLImeters! 
 

[Nick V]

Any chance of making non-rotational risers, to a maximum of 20mm?

I've been shopping around, and the Wild @ Heart 20mm risers from the Adventure bike shop in Van Riebeeck Rd, Edenvale are MORE expensive than the Wunderlich equivalents from Cytech in Robertsham!   

Crazy, but true.

[GSing]

Any chance of making non-rotational risers, to a maximum of 20mm?

I've been shopping around, and the Wild @ Heart 20mm risers from the Adventure bike shop in Van Riebeeck Rd, Edenvale are MORE expensive than the Wunderlich equivalents from Cytech in Robertsham!   

Crazy, but true.

We have stock on 15mm and 30mm at R820,00 per set.

[Cobus G]

Quick newby question....are any of the raisers a simple DIY bolt on exercise?

[zebra - Flying Brick]

Quick newby question....are any of the raisers a simple DIY bolt on exercise?

yes!

As always, just check your cables do not 'pull tight' on full left lock and full right lock, EVEN IF your bike is fly-by-wire. waddah waddah, just CHECK!
Chris & Team

[Cobus G]

Quick newby question....are any of the raisers a simple DIY bolt on exercise?

yes!

As always, just check your cables do not 'pull tight' on full left lock and full right lock, EVEN IF your bike is fly-by-wire. waddah waddah, just CHECK!
Chris & Team

Thanx Chris,hence my question,I need to know this will not happen before I buy...don't want to buy and find out it needs longer cables etc...

[Nick V]

Quick newby question....are any of the raisers a simple DIY bolt on exercise?

yes!

As always, just check your cables do not 'pull tight' on full left lock and full right lock, EVEN IF your bike is fly-by-wire. waddah waddah, just CHECK!
Chris & Team

Thanx Chris,hence my question,I need to know this will not happen before I buy...don't want to buy and find out it needs longer cables etc...

It's always a possibility with rotational risers - as the man says, check. 
Always good to experiment with the bars in a few different positions in any case. Front, back, upright, slight tilt on the bars. That way, you'll know every wrinkle the different positions can throw.

[Edd]

Hi Zeb,

Have these been selling?

Are the guys happy with them?

Looking for the extra height and movement.

[zebra - Flying Brick]

Hi Zeb,

Have these been selling?
YES
Are the guys happy with them?
YES
Looking for the extra height and movement.
THEY WILL GIVE YOU BOTH.

Cheers
Chris & Team