KTM 640/950 Speedo button repairs... to get them to actually work!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Malibu

Bachelor Dog
Joined
Aug 23, 2007
Messages
11,161
Reaction score
44
Location
Somewhere between SA, UK and Switzerland
Bike
NER-A-CAR
Ok, so this should be on the poor-a-tek thread, but anyway, seems all KTM's have this problem, where the bottons don't want to work anymore.

My MODE button just would not work to change mode, on the odd occasion I could get it to work, so yesterday, I opened the thing up and saw that there is enough space for the little bar to move above the sensor button.

I carefully cut out to little round circles (about 5mm diameter) from the lid of a margarine tub, and then glued one flat onto the pin coming up from the sensor, and one onto the pin going down from the rubber in the screen... now the two make perfect contact with each other and I'm getting 100% changes happening on the display...

Hope it holds!  If it does, I'll fix Mark's too!
 
Top