DR200. Rolling chassis/spares up for grabs.

[®©errie]

According to the pic the cdi wont fit my model bike

[kelly007]

Im still interested in the front disc if it looks ok and is available...

[DeepBass9]

Im still interested in the front disc if it looks ok and is available...

You don't want to take the whole wheel?

[kelly007]

Wouldnt mind but postage will be a pain. R200 for disc if its decent and nobody takes it with the wheel

[Goose]

Wouldnt mind but postage will be a pain. R200 for disc if its decent and nobody takes it with the wheel

well matey - I have some small items - where in the WC are you... maybe the Capetonians can share some transport costs....?

[DeepBass9]

Im still interested in the front disc if it looks ok and is available...

Here's the disc. Looks like an aftermarket one as is different to the one on my DR200. Maybe 0.5mm wear (eyeballed)

[DeepBass9]

Come guys, a few more bits and I might break even on this deal........

[lecap]

I've got DR200SE leftover as follows:

2x clutch lever 57620-15D11 clutch lever n.p. R100ea.
1x 58200-44AB1 clutch cable n.p. R200
1x 58300-44AA0 throttle cable n.p. R160
2x 59346-13A00 lock washer n.p. R26 (needed for front brake pad replacement)
1 set wheel bearings Jap. generics (NSK) n.p. R200

Everything brand new. The individual prices of the Suzuki parts are 2007 US$ prices. It will probably be around twice as expensive if you buy locally and today.

Everything for sale ONLY as a lot for R 500 plus postage if required. parts fit all "late" Djebel 200 and DR200SE from 1996 onwards.

[DeepBass9]

Goose, any update on how to get the kick starter shaft out?

   all I have been able to find is this parts diagram below. Seems item # 14 is a circlip that might be the thing holding the shaft in place..... but that might well be on the opposite side of the engine...?

Does this help at all........?

The two attached pics seem to show that the shaft/gear assembly comes out as one item...?

Goose, the engine definitely needs to be split to get that shaft out, but there are too many stripped bolts to split it easily, so its too much of a mission to get it out without taking a grinder and cutting a hole in the case. Do you still want the carb? Can I post you the whole engine? Any other ideas?

[Goose]

Goose, any update on how to get the kick starter shaft out?

   all I have been able to find is this parts diagram below. Seems item # 14 is a circlip that might be the thing holding the shaft in place..... but that might well be on the opposite side of the engine...?

Does this help at all........?

The two attached pics seem to show that the shaft/gear assembly comes out as one item...?

Goose, the engine definitely needs to be split to get that shaft out, but there are too many stripped bolts to split it easily, so its too much of a mission to get it out without taking a grinder and cutting a hole in the case. Do you still want the carb? Can I post you the whole engine? Any other ideas?

 

Yep - want the carb & kickstarter.......... please?

What will the weight of the engine be..........?  Cost - would probably be horrendous..........     where in the world are you - maybe I can skollie a lift for the thing - or maybe someone else could try get it out...?

[Spozzy]

Just found this post, rather late, I'm interested in the wheels if they are serviceable.

[DeepBass9]

Goose, any update on how to get the kick starter shaft out?

   all I have been able to find is this parts diagram below. Seems item # 14 is a circlip that might be the thing holding the shaft in place..... but that might well be on the opposite side of the engine...?

Does this help at all........?

The two attached pics seem to show that the shaft/gear assembly comes out as one item...?

Goose, the engine definitely needs to be split to get that shaft out, but there are too many stripped bolts to split it easily, so its too much of a mission to get it out without taking a grinder and cutting a hole in the case. Do you still want the carb? Can I post you the whole engine? Any other ideas?

 

Yep - want the carb & kickstarter.......... please?

What will the weight of the engine be..........?  Cost - would probably be horrendous..........     where in the world are you - maybe I can skollie a lift for the thing - or maybe someone else could try get it out...?

Where's our friend LouisXander, isn't he quite handy with a spanner? Maybe I can give the engine to him and he can get it out?

[DeepBass9]

Just found this post, rather late, I'm interested in the wheels if they are serviceable.

The front wheel, hub rim and spokes seem fine . The back wheel is fucked. I'll throw that in for free!. Make me an offer.... The front disk is going to DJ I think?

[Goose]

Goose, any update on how to get the kick starter shaft out?

   all I have been able to find is this parts diagram below. Seems item # 14 is a circlip that might be the thing holding the shaft in place..... but that might well be on the opposite side of the engine...?

Does this help at all........?

The two attached pics seem to show that the shaft/gear assembly comes out as one item...?

Goose, the engine definitely needs to be split to get that shaft out, but there are too many stripped bolts to split it easily, so its too much of a mission to get it out without taking a grinder and cutting a hole in the case. Do you still want the carb? Can I post you the whole engine? Any other ideas?

 

Yep - want the carb & kickstarter.......... please?

What will the weight of the engine be..........?  Cost - would probably be horrendous..........     where in the world are you - maybe I can skollie a lift for the thing - or maybe someone else could try get it out...?

Where's our friend LouisXander, isn't he quite handy with a spanner? Maybe I can give the engine to him and he can get it out?

[LouisXander]

I'm here guys! Sorry, a KTM kept me busy for 2 weeks!! Steve, I owe you R300 ne?

[Goose]

I'm here guys! Sorry, a KTM kept me busy for 2 weeks!! Steve, I owe you R300 ne?

Oom.... kan oom asseblief help om daai moere los te maak....?  groot 'seblief?   

[DeepBass9]

I'm here guys! Sorry, a KTM kept me busy for 2 weeks!! Steve, I owe you R300 ne?

Oom.... kan oom asseblief help om daai moere los te maak....?  groot 'seblief?   

Its probably easier just to take a grinder and cut it out.

[Spozzy]

Just found this post, rather late, I'm interested in the wheels if they are serviceable.

The front wheel, hub rim and spokes seem fine . The back wheel is fucked. I'll throw that in for free!. Make me an offer.... The front disk is going to DJ I think?

I have no idea, How does R300 sound?

[DeepBass9]

Sounds good to me, when do you want to come and fetch? Who is going to take the disc? You or DJ or kelly?

[DeepBass9]

I'm here guys! Sorry, a KTM kept me busy for 2 weeks!! Steve, I owe you R300 ne?

Do you want me to post the oil cooler rather? Its less that a Kg. should only cost about R50 for postage?