Welcome, Guest. Please Login or Register

Author Topic: Driving shaft 1150GS  (Read 851 times)

0 Members and 1 Guest are viewing this topic.

Offline mwdewet

  • Newbie
  • Bike: BMW R1150GS Adventure
  • Posts: 2
Driving shaft 1150GS
« on: August 28, 2013, 01:41:34 pm »
My driveshaft bearing and seal is broken. Can anyone assist with replacing it or have a secondhand unit?


Sent from my iPhone using Tapatalk - now Free
 

Offline Welsh

  • BMW R1150GSV
  • Moderator
  • Bachelor Dog
  • *****
  • Bike: BMW R1150GS
    Location: Gauteng
  • Posts: 18,530
  • Thanked: 574 times
  • Thunder Twonk. The two legged Twat Monkey.
Re: Driving shaft 1150GS
« Reply #1 on: August 28, 2013, 02:02:17 pm »
My driveshaft bearing and seal is broken. Can anyone assist with replacing it or have a secondhand unit?


Sent from my iPhone using Tapatalk - now Free

This one?



If so, it is as cheap as anywhere else to get parts from BMW about R1500 total, fitting is quite easy, do not think about second hand.


http://www.wilddog.za.net/forum/index.php?topic=1011.20

Then go introduce yourself in new members and someone will move this to the 1150 section
« Last Edit: August 28, 2013, 02:08:08 pm by Welsh »
When is this "Old enough to know better" supposed to kick in?
 

Offline Welsh

  • BMW R1150GSV
  • Moderator
  • Bachelor Dog
  • *****
  • Bike: BMW R1150GS
    Location: Gauteng
  • Posts: 18,530
  • Thanked: 574 times
  • Thunder Twonk. The two legged Twat Monkey.
Re: Driving shaft 1150GS
« Reply #2 on: August 28, 2013, 06:48:53 pm »
MWDEWT I have a used bearing in "good" condition, but how do we get it to you?
When is this "Old enough to know better" supposed to kick in?
 

Offline Freak

Re: Driving shaft 1150GS
« Reply #3 on: August 28, 2013, 07:17:49 pm »
Welsh if he is in cpt I can take it down. I come up few times a week.
Italjet - still have
YZ 80 - sold
Suzuki TS - 50 - broken
2x YZ 250cc - sold
Kawa KDX 200 - sold ZX - 6R - sold Suzuki GSXR 1000 K4- broken and in the bin Suzuki GSXR 1000 K5 - sold BMW GS 1150 - sold KTM 950 adventure S - sold Currently:  '79 BMW Bobber '63 BMW R50/2 '62 BMW R60/2 with sidecar '54 BMW R26/2 ... Still in kit form '74 BMW R75/6 custom .. In progress '82 BMW R80 G/S
 

Offline SmuGS

  • A very quiet
  • Senior Member
  • ***
  • Bike: BMW R1150GS
    Location: Eastern Cape
  • Posts: 3,330
  • Thanked: 65 times
  • 100 048 km.
Re: Driving shaft 1150GS
« Reply #4 on: August 28, 2013, 07:29:33 pm »





http://www.wilddog.za.net/forum/index.php?topic=1011.20


Thanks for the link Welsh, I now know what to expect should the time come.... :thumleft:
Nee wat vlekkelose ek kuier op my lekkerste tussen die rokers,dronkgatte,vloekers,hoere en ander sondaars  :imaposer:
R1150gs,  KLE 500, XT660R.
 

Offline Welsh

  • BMW R1150GSV
  • Moderator
  • Bachelor Dog
  • *****
  • Bike: BMW R1150GS
    Location: Gauteng
  • Posts: 18,530
  • Thanked: 574 times
  • Thunder Twonk. The two legged Twat Monkey.
Re: Driving shaft 1150GS
« Reply #5 on: August 29, 2013, 07:53:03 am »
Welsh if he is in cpt I can take it down. I come up few times a week.

I think he is in Musina!
When is this "Old enough to know better" supposed to kick in?
 

Offline mwdewet

  • Newbie
  • Bike: BMW R1150GS Adventure
  • Posts: 2
Re: Driving shaft 1150GS
« Reply #6 on: August 31, 2013, 10:13:26 am »
Hi guys i am in Jhb and my cell is 0722744116. I know the parts is not to expensive, but the problem is in asmmble it correctly whith the right spacing and shimms. Any one out there who can do this properly?


Sent from my iPhone using Tapatalk - now Free
 

Offline ChrisL - DUSTRIDERS

  • Forum Vendor
  • Castrated Dog
  • ******
  • Bike: BMW R1200GS
    Location: Western Cape
  • Posts: 32,157
  • Thanked: 838 times
    • dustriders.co.za
Re: Driving shaft 1150GS
« Reply #7 on: August 31, 2013, 10:23:32 am »
Hi guys i am in Jhb and my cell is 0722744116. I know the parts is not to expensive, but the problem is in asmmble it correctly whith the right spacing and shimms. Any one out there who can do this properly?


Sent from my iPhone using Tapatalk - now Free
Then you need to visit Welsh with lots of beer ;) :peepwall:
He does the drinking while he tells you how to do it.(only way to learn) :deal:
MOTORCYCLE ACCESSORIES RETAILER
info@dustriders.co.za
ENDURISTAN SOFTLUGGAGE IMPORTER
www.dustriders.co.za
 

Offline Welsh

  • BMW R1150GSV
  • Moderator
  • Bachelor Dog
  • *****
  • Bike: BMW R1150GS
    Location: Gauteng
  • Posts: 18,530
  • Thanked: 574 times
  • Thunder Twonk. The two legged Twat Monkey.
Re: Driving shaft 1150GS
« Reply #8 on: August 31, 2013, 11:11:25 am »
Hi guys i am in Jhb and my cell is 0722744116. I know the parts is not to expensive, but the problem is in asmmble it correctly whith the right spacing and shimms. Any one out there who can do this properly?


Sent from my iPhone using Tapatalk - now Free
Then you need to visit Welsh with lots of beer ;) :peepwall:
He does the drinking while he tells you how to do it.(only way to learn) :deal:
ok questions, how many kms since bearing was done last? My view is if I get 50,000km out of a bearing then the shimming is OK and I do a bearing change using the existing shims if you are getting 25,000 then reshim it, if you are in the East I recomend donovan in benoni. If I seem short my phone is kark for posting
« Last Edit: August 31, 2013, 11:13:35 am by Welsh »
When is this "Old enough to know better" supposed to kick in?
 

Offline GSBoland

  • Senior Member
  • ***
  • Bike: BMW R1100GS
    Location: Western Cape
  • Posts: 952
  • Thanked: 1 times
  • Paarl
Re: Driving shaft 1150GS
« Reply #9 on: September 01, 2013, 10:47:59 am »
Hi guys i am in Jhb and my cell is 0722744116. I know the parts is not to expensive, but the problem is in asmmble it correctly whith the right spacing and shimms. Any one out there who can do this properly?


Sent from my iPhone using Tapatalk - now Free
Then you need to visit Welsh with lots of beer ;) :peepwall:
He does the drinking while he tells you how to do it.(only way to learn) :deal:
ok questions, how many kms since bearing was done last? My view is if I get 50,000km out of a bearing then the shimming is OK and I do a bearing change using the existing shims if you are getting 25,000 then reshim it, if you are in the East I recomend donovan in benoni. If I seem short my phone is kark for posting
:thumleft:
Black 1100GS