2007 640 Adv Oil level Inspection Glass

[KTMRICK]

It seems that oil is leaking from the oil level inspection glass cover (on the RIGHT hand side in the clutch cover) of my bike. Does anyone know how to repair/replace this if at all possible? Any advice would be appreciated. Thanks.

[Dux]

They are available as a separate item from KTM , remove cover , pry out old sightglass and in with new , I generally use a bit of Loctite 599 Ultra grey on the sealing surface .

[KTMRICK]

Thanks Dux. Bought the part from RAD this morning but forgot to get a new clutch cover gasket.  R260 odd ronts for a little piece of glass......

[Dux]

At least you can get it , al lot of other companies don't sell it loose .

[igeorge]

If the glass is leaking past the seal, surely you could just pop it out and reseal it as advised above?  Glass is usually either fine or broken:)

Cheers
Ian

[Dux]

Usually the rubbers go hard and brittle , so sealing is only a temporary fix at best .