Author Topic: Husky 610 TE (Read 8133 times)

BiG DoM · « **Reply #60 on:** October 22, 2013, 04:33:24 pm »

Quote from: HK on October 22, 2013, 06:22:46 am

Hi Dom

Its the spark plug cover . What do u mean with qd ?

Ok - though it may be. You should be able to pick up an NGK replacement at Midas, Autozone etc. They just screw onto the HD lead normally. Superglue would give a temp fix but I would look for a good quality replacement.

The QD's are plastic and quite a tight and tricky fit are often broken and the part on the petrol tank is a real bugger if broken to replace/fix. They just need extra attention when dealing with them.

HK · « **Reply #61 on:** October 22, 2013, 04:46:16 pm »

Thanks for all the info and help guys , I do appreciate it .

HK · « **Reply #62 on:** October 22, 2013, 04:51:28 pm »

Swartskaap - jou tosser

HK · « **Reply #63 on:** October 22, 2013, 04:53:44 pm »

Bike back together just waiting for exhaust

blazes · « **Reply #64 on:** October 22, 2013, 05:23:30 pm »

Quote from: HK on October 22, 2013, 04:53:44 pm

Bike back together just waiting for exhaust

Got a spare one if you need a loaner --Brand new and catted -- never been on a bike yet -

blazes · « **Reply #65 on:** October 22, 2013, 05:26:22 pm »

Quote from: Hennie on October 22, 2013, 11:37:55 am

Quote from: HK on October 21, 2013, 10:15:55 pm
Went to look for a spedo cable. , but nobody has stock and must be ordered . 2 weeks .

So I found a broken one Hennie gave me and just cut off the bottom piece and joined it to the current cable and it works !! So this will do until the new one comes

Henko,
My brak het daai speedo kabel twee keer afgevreet - dis hoekom daar 'n stukkende ekstra een was.
Ek voel half skuldig dat jy so paar probleme gehad het langs die pad - ek het maar ook gesukkel met daai exhaust. Het ook al ewig los gerattle.
Hoop jy het darem nie buyers'remorse nie?

Well if my deal with my 450Te went down on time as planned --

She would have been --in my workshop --HK --You are very fortunate --these bikes are going to be sought after in a year or two --

swart skaap · « **Reply #66 on:** October 22, 2013, 06:20:17 pm »

Quote from: BiG DoM on October 22, 2013, 04:29:14 pm

We are not discussing agricultural implements here! WTF? Think you have stubbled on the wrong thread ... must be a Farmers Weekly one for you somewhere

Good one!

HK · « **Reply #67 on:** October 22, 2013, 07:12:06 pm »

Thanks Blazes , how about you sell it to me , and I will give you mine when its fixed ........

Straatkat · « **Reply #68 on:** October 22, 2013, 11:18:31 pm »

A clean garage is the sign of a sick mind...unless there is a lekka 610 parked in it!

blazes · « **Reply #69 on:** October 23, 2013, 05:59:39 am »

Quote from: HK on October 22, 2013, 07:12:06 pm

Thanks Blazes , how about you sell it to me , and I will give you mine when its fixed ........

LOL ==Maybe sidetrack will part with his -- mine not for sale --

HK · « **Reply #70 on:** October 23, 2013, 06:37:53 am »

Ha ha ha , its worth a try !!!

HK · « **Reply #71 on:** October 24, 2013, 08:28:06 pm »

Hi Guys

Can someone maybe tell me that bracket on the sub frame that holds the rear exhaust bolt , is it steel or aluminum ?

HK · « **Reply #72 on:** October 24, 2013, 08:29:10 pm »

I see mine is cracked , so i need to weld it .

blazes · « **Reply #73 on:** October 24, 2013, 08:51:10 pm »

Quote from: HK on October 24, 2013, 08:29:10 pm

I see mine is cracked , so i need to weld it .

Ally ----

HK · « **Reply #74 on:** October 24, 2013, 09:14:08 pm »

Thanks Blazes , you dont by chance know of somebody who can weld alu nearby ?

blazes · « **Reply #75 on:** October 24, 2013, 09:18:28 pm »

Quote from: HK on October 24, 2013, 09:14:08 pm

Thanks Blazes , you dont by chance know of somebody who can weld alu nearby ?

I go to a place in Sunderland Ridge ---They do aircraft welding and are top notch --Prices are good --- They are next to Kevern Pelser. Don't remember the name any more --Think its called --Avionics --

HK · « **Reply #76 on:** October 25, 2013, 05:18:10 pm »

Thanks blazes

Straatkat · « **Reply #77 on:** October 25, 2013, 07:30:48 pm »

HK, I use a guy in Krugersdorp, he has like 40 years experience and welds really well, has done all my ally stuff for years. If it's not too far for you pm me and I'll give you his details.

HK · « **Reply #78 on:** October 28, 2013, 04:22:13 pm »

Thanks straatkat , but i am sorted . Now to make time to ride

sidetrack · « **Reply #79 on:** October 28, 2013, 07:02:04 pm »

Nice avatar