- Joined
- Oct 15, 2008
- Messages
- 8,936
- Reaction score
- 2,078
- Location
- Out of Africa
- Bike
- KTM 950 Adventure S
I've got 2 holders, both manual, that I'd like to motorize but need a bit of info seeing as I've never used one before.
Which way does the holder wind - that is, is the roll loaded on the top roller or the bottom one?
And any ideas on the speeds of the roll/motor/
will a strip of LEDs be adequate for a backlight or is this too much, perhaps?
P.S. I realise this is a general tech type issue and the thread might be moved, but I figured the guys with the experience are here
Which way does the holder wind - that is, is the roll loaded on the top roller or the bottom one?
And any ideas on the speeds of the roll/motor/
will a strip of LEDs be adequate for a backlight or is this too much, perhaps?
P.S. I realise this is a general tech type issue and the thread might be moved, but I figured the guys with the experience are here
![N[]vA](https://secure.gravatar.com/avatar/39fc70600d70a0afa40b682c3a695dc0?s=96){kind=avatar}
