Author Topic: What have you done to your R 1200 GS/A LC today? (Read 40200 times)

Brucet · « **Reply #300 on:** December 20, 2017, 11:47:34 am »

Hi Zoobie

Im not sure. I will find out this afternoon and let you know.

Brucet · « **Reply #301 on:** December 21, 2017, 07:22:58 am »

Zoobie the gearshift assist cost R6382.21. Then the enabling code was R553.26 and then fitting was R360.00

I think it is well worth it and works brilliantly. Ive tried it at low speeds and at higher speeds with no issues.

I also fitted a headlight protector and got a cool little reflective sticker from Nocturnul_Thingie for the rear poop scoop (is that correct)?

zoobie · « **Reply #302 on:** December 21, 2017, 09:10:29 am »

Quote from: Brucet on December 21, 2017, 07:22:58 am

Zoobie the gearshift assist cost R6382.21. Then the enabling code was R553.26 and then fitting was R360.00

I think it is well worth it and works brilliantly. Ive tried it at low speeds and at higher speeds with no issues.

I also fitted a headlight protector and got a cool little reflective sticker from Nocturnul_Thingie for the rear poop scoop (is that correct)?

cool thanks . best I raid the piggy bank .. again.

enjoy enjoy. safe riding

Brucet · « **Reply #303 on:** December 22, 2017, 05:23:30 pm »

Fitted a raid tool box supplied by Flying Brick. Great people to deal with and very happy with it.

Brucet · « **Reply #304 on:** December 22, 2017, 09:48:56 pm »

Sorry here is the pic

krokonoster · « **Reply #305 on:** December 22, 2017, 11:19:54 pm »

Me too! Mine from Jabo, new black one, 1 cm bigger (does not sound like much but allowed to get my tow rope in as well) and option to either use hinge or detach lid. Great stuff.

And I ditched my rear wheel hugger. Looks like it mean business now. :-P

Brucet · « **Reply #306 on:** January 04, 2018, 09:58:23 am »

nice!

Fitted frame protectors.

BMWPE · « **Reply #307 on:** January 04, 2018, 05:43:36 pm »

looks good

krokonoster · « **Reply #308 on:** January 05, 2018, 09:52:58 am »

Quote from: BMWPE on January 04, 2018, 05:43:36 pm

looks good

The only problem is they don't stay that good looking (boots rub against them, get all dull)
I'm considering to get the Wunderlich ones instead. Anyone got that, if so what it looks like after a few months?

Brucet · « **Reply #309 on:** January 05, 2018, 10:18:39 am »

Thats ok. Better them than the frame. When they get to damaged I can replace them also as they are fairly inexpensive.

The wunderlich are about R300 more expensive and I am not sure about the look. Im sure they will also get scratched and worn out though

https://www.gps4africa.co.za/bmw-r1200gs-adventure-lc-k50-k51-2013-17/4093-wunderlich-frame-protector-black

krokonoster · « **Reply #310 on:** January 05, 2018, 10:33:40 am »

Quote from: Brucet on January 05, 2018, 10:18:39 am

Thats ok. Better them than the frame. When they get to damaged I can replace them also as they are fairly inexpensive.

Actually rubbed the paint off to the metal just after the guard's end. :-( Bike not even 6 months old
Think it's from ride standing for hours on end.

ChrisL - DUSTRIDERS · « **Reply #311 on:** January 05, 2018, 10:36:31 am »

Think it's from ride standing for hours on end.

O jinne hoop nie Dan lees dit raak dan hoor ons weer van die euwels van staan en ry

Brucet · « **Reply #312 on:** January 05, 2018, 10:38:22 am »

Quote from: krokonoster on January 05, 2018, 10:33:40 am

Quote from: Brucet on January 05, 2018, 10:18:39 am
Thats ok. Better them than the frame. When they get to damaged I can replace them also as they are fairly inexpensive.

Actually rubbed the paint off to the metal just after the guard's end. :-( Bike not even 6 months old
Think it's from ride standing for hours on end.

Please share a pic so I can see where. I have a plan for that which i will share if it works.

Thank you

silvrav · « **Reply #313 on:** January 05, 2018, 11:11:32 am »

finally getting her repairs done....in with Sandton mottorad and getting new shoes and helmet as well

krokonoster · « **Reply #314 on:** January 05, 2018, 11:33:37 am »

Quote from: Brucet on January 05, 2018, 10:38:22 am

Please share a pic so I can see where. I have a plan for that which i will share if it works.

Thank you

Will do as soon I get her back (at Gravelman..dropped her so hard it's pissing oil even after replacing 2 bent header bolts. :-(

Brucet · « **Reply #315 on:** January 05, 2018, 11:37:56 am »

Thank you.

Eish, good luck with the repairs.

FJR · « **Reply #316 on:** January 16, 2018, 12:59:31 pm »

Quote from: Brucet on January 04, 2018, 09:58:23 am

nice!

Fitted frame protectors.

Who supply these frame protectors?

Brucet · « **Reply #317 on:** January 16, 2018, 01:03:19 pm »

Quote from: FJR on January 16, 2018, 12:59:31 pm

Quote from: Brucet on January 04, 2018, 09:58:23 am
nice!

Fitted frame protectors.
Who supply these frame protectors?

Thank you. These are the bmw ones and cost just under R1000 for the pair.

Brucet · « **Reply #318 on:** April 18, 2018, 12:11:25 pm »

Fitted a screen extender. Definitely recommend it for the taller people.

Brucet · « **Reply #319 on:** April 18, 2018, 12:13:58 pm »

Sorry I have no idea why the image is flipped on its side.