Welcome, Guest. Please Login or Register

Author Topic: Display on bike acting up.  (Read 704 times)

0 Members and 1 Guest are viewing this topic.

Offline TK

  • Member
  • **
  • Bike: Husqvarna (all models)
    Location: Gauteng
  • Posts: 361
  • Thanked: 7 times
  • Life's an adventure, enjoy the ride.
Display on bike acting up.
« on: November 19, 2015, 08:23:57 pm »
So before  I hit the interweb and go through the owners manual to look for data on why I have certain things happening with the display on my te610 I want to put it out there to all those other wonderful and good looking te610 owners out there.

My display has the turn signal indicator and hi beam indicator on continuously. And the neutral light flashes 4 times on a continuous cycle.
Flasher relay does not work but the indicator lights do come on.
High beam low beam works otherwise as does the rev counter, clock etc.
Almost feels like a bad ground wire.

Any thoughts out there?
 

Offline Herklaas

  • Senior Member
  • ***
  • Bike: Triumph (all models)
    Location: Western Cape
  • Posts: 2,376
  • Thanked: 61 times
  • Do it, you only live twice.
Re: Display on bike acting up.
« Reply #1 on: November 19, 2015, 08:30:30 pm »
 :sip: Water, damp? can you open the unit? spray with water repellent and after with silicon.
Yamaha 50, Yamaha 400, 2 x Yamaha DR 350 LC, Honda CBX 550 F2, Honda TransAlp 650, Triumph Tiger 800 Xc,
Now 2015 Triumph Tiger 800 Xcx.and.. my favorite... 1996 Yamaha Tenere 660 5 valve single.
 

Offline TK

  • Member
  • **
  • Bike: Husqvarna (all models)
    Location: Gauteng
  • Posts: 361
  • Thanked: 7 times
  • Life's an adventure, enjoy the ride.
Re: Display on bike acting up.
« Reply #2 on: November 19, 2015, 08:53:26 pm »
Noted
 

Offline Rough Rider

  • Senior Member
  • ***
  • Bike: Husqvarna (all models)
    Location: Western Cape
  • Posts: 4,934
  • Thanked: 46 times
  • Hang time
Re: Display on bike acting up.
« Reply #3 on: November 20, 2015, 08:41:27 am »
The high beam indicator on mine also stays on all the time regardless of whether low or high beam are on. Also the flicker indicator does not work.
Current rides: 2015 WR250F / 2016 690R / 2017 701SM
 

Offline TK

  • Member
  • **
  • Bike: Husqvarna (all models)
    Location: Gauteng
  • Posts: 361
  • Thanked: 7 times
  • Life's an adventure, enjoy the ride.
Re: Display on bike acting up.
« Reply #4 on: November 20, 2015, 09:54:18 am »
Had a look this morning again and pulled all the connectors apart behind the light. Just left the display and ignition connectors in.
So its not coming from the handlebar switch. So probably a back feed from somewhere or a bad ground. Leaning towards a bad ground.
 

Offline exkdx

Re: Display on bike acting up.
« Reply #5 on: November 20, 2015, 03:42:36 pm »
The awesomeness of Husky TE610 stops when it comes to the display and other electrical paraphernalia
Don't expect it to work ...be amazed if it works :biggrin:
KDX200 gone
YZ 250 gone
Husky TE610 one left
KTM 500 XC-W latest addition
 

Offline Kykdaar

  • Forum Whore
  • ****
  • Bike: Zundapp (all models)
    Location: Gauteng
  • Posts: 7,614
  • Thanked: 2 times
Re: Display on bike acting up.
« Reply #6 on: November 20, 2015, 03:44:38 pm »
The awesomeness of Husky TE610 stops when it comes to the display and other electrical paraphernalia
Don't expect it to work ...be amazed if it works :biggrin:

Hahaha....correct. They should throw in a Vapour unit when they sell a Husky
 

Offline alanB

  • Vendors
  • Forum Whore
  • ****
  • Bike: Husqvarna (all models)
    Location: Gauteng
  • Posts: 6,769
  • Thanked: 10 times
    • www.extinction.co.za
Re: Display on bike acting up.
« Reply #7 on: November 21, 2015, 07:00:18 am »
Howzit Tony

Check out this thread, I identified what most of those different pins do on the big connector at the back of the instrument panel, this might help you?

http://www.wilddog.za.net/forum/index.php?topic=125920.0
Husqvarna '09 610TE - Great Bike!

I just finished a SciFi novel Extinction: Task Team, download the preview.
 

Offline TK

  • Member
  • **
  • Bike: Husqvarna (all models)
    Location: Gauteng
  • Posts: 361
  • Thanked: 7 times
  • Life's an adventure, enjoy the ride.
Re: Display on bike acting up.
« Reply #8 on: November 22, 2015, 09:25:48 am »
Thanks Alan. Did find that link earlier on and was a big help. Had all the plugs unplugged with just the ignition and display plug in. Deduced that there was no back feed. So either the display is faulty or there is a fault that needs to be cleared..........maybe a service reminder which needs to be cleared by the service provider.......? Don't think it's a fault.
Managed to clear the flashing neutral though. Did this via the instruction manual. I'm going to try download the workshop manual.
Otherwise found some good exploded wiring schematics on the web.
Bike's electrics are otherwise back together and all is working.
Thanks all.