Update: Husky TE610 Valvetrain Rebuild

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Alphat

Pack Dog
Joined
Nov 1, 2012
Messages
335
Reaction score
3
Location
Johannesburg
Bike
KTM 990 Adventure
I seem to have excessive axial runout (play) on the exhaust valve rocker. The inlet valve rocker has about 0.3mm runout but the exhaust side is about 1mm and when pushed towards the left the arms sit offcentre on the valves. I have been through the workshop manual and can't find any spec on this.
Does anyone know if this is normal?
Has anyone experienced this before and how did you fix it?
I see from the parts catalogue the washers for the rocker shaft are available in different thicknesses to take up runout on the shaft but I haven't stripped cam cover to take a look if this will sort out the runout on the rocker as well.
Any advice would be appreciated.

Thanks
 
Top