zebra
Bachelor Dog
- Joined
- Jun 23, 2008
- Messages
- 14,387
- Reaction score
- 990
- Bike
- BMW (all models)
attention ALL BARK-BUSTER users - new product to retro-fit!
NEWS; the Australian designers of Bark Busters have now launched a very-innovative RETRO-FIT-TABLE LED 'add-on' for all Bark Busters products:
1. An always-on CLEAR LED 'light strip' that is very visible to cars; installed on the face of the hand-guard all the more so in that there are tiny inputs/movements from the handlebars, which then further increases the visibility of these LED's...
2. a different AMBER light strip that is essentially a VERY visible LED indicator, but situated on the face of the Bark Buster hand guard...
(you can also purchase a RESISTOR, that will slow the blink-rate of these LED indicators IF they are installed on a NON-LED circuit).
All wiring is included, and this is a fairly straight-forward, plug & play installation.
A very handy paper TEMPLATE is proved, simply drill TWO SMALL holes into the hand-guard, and screw either the CLEAR strip or the AMBER INDICATOR strip onto the face of the hand-guard
Pricing:
LED AMBER indicators - per set, with wiring: R720 incl vat.
Description
LED Amber Light - Indicator (set of 2).
For use as a turn indicator.
Can be fitted to the upper surface only of JET guards.
Can be fitted to the upper and/or lower surface of VPS and STORM guards.
E mark approved as an Indicator light.
15 super bright LED's per light.
Low power draw.
Increase your visibility to other road users.
May require optional Resistor for correct flash rate (Code: LED-RES-001). Sold separately.
LED CLEAR 'high-viz' strip, per set, with wiring: R720 per set.
Description
LED White Light - Position/Running (set of 2).
Increase your visibility to other road users.
Can be fitted to the upper surface only of JET guards.
Can be fitted to the upper and/or lower surface of VPS and STORM guards.
E mark approved as a Position light.
15 super bright LED's per light.
Low power draw.
resistor for bikes that DO NOT HAVE LED indicators, R160.
Cheers
Chris & Team
NEWS; the Australian designers of Bark Busters have now launched a very-innovative RETRO-FIT-TABLE LED 'add-on' for all Bark Busters products:
1. An always-on CLEAR LED 'light strip' that is very visible to cars; installed on the face of the hand-guard all the more so in that there are tiny inputs/movements from the handlebars, which then further increases the visibility of these LED's...
2. a different AMBER light strip that is essentially a VERY visible LED indicator, but situated on the face of the Bark Buster hand guard...
(you can also purchase a RESISTOR, that will slow the blink-rate of these LED indicators IF they are installed on a NON-LED circuit).
All wiring is included, and this is a fairly straight-forward, plug & play installation.
A very handy paper TEMPLATE is proved, simply drill TWO SMALL holes into the hand-guard, and screw either the CLEAR strip or the AMBER INDICATOR strip onto the face of the hand-guard
Pricing:
LED AMBER indicators - per set, with wiring: R720 incl vat.
Description
LED Amber Light - Indicator (set of 2).
For use as a turn indicator.
Can be fitted to the upper surface only of JET guards.
Can be fitted to the upper and/or lower surface of VPS and STORM guards.
E mark approved as an Indicator light.
15 super bright LED's per light.
Low power draw.
Increase your visibility to other road users.
May require optional Resistor for correct flash rate (Code: LED-RES-001). Sold separately.
LED CLEAR 'high-viz' strip, per set, with wiring: R720 per set.
Description
LED White Light - Position/Running (set of 2).
Increase your visibility to other road users.
Can be fitted to the upper surface only of JET guards.
Can be fitted to the upper and/or lower surface of VPS and STORM guards.
E mark approved as a Position light.
15 super bright LED's per light.
Low power draw.
resistor for bikes that DO NOT HAVE LED indicators, R160.
Cheers
Chris & Team
