Scribble
Race Dog
- Joined
- Feb 3, 2006
- Messages
- 2,295
- Reaction score
- 1
- Location
- Pringle Bay WC
- Bike
- BMW R1150GS Adventure
So I pulled the rear wheel off the wr today to check the chain slider and glue it down as they are apparently notorious for chewing up the swingarm
I feel a little bit of play up and down probably about 2 or 3 mm at the end of the swingarm
Which would translate to almost nothing at the front.
do I need to replace all the bearing on the linkage and swingarm ?
I feel a little bit of play up and down probably about 2 or 3 mm at the end of the swingarm
Which would translate to almost nothing at the front.
do I need to replace all the bearing on the linkage and swingarm ?
