- Joined
- Jul 27, 2010
- Messages
- 5,483
- Reaction score
- 655
- Location
- Blouberg, Cape Town
- Bike
- KTM 890 Adventure R
Johan rides a 650 Vulcan and ER6N. His wife also rides an ER6N which shares a motor with the Versys. He recently fitted a BoosterPlug on his ER6N, and made the mistake to then fit the BoosterPlug to his wife's ER6N. Now she doesn't want to give it back because the fueling is so nice. It adds usable rpm to the bottom end of the rpm range. Gone is the jerkiness and on/off sensation. It now pulls right through the rpm range. It forced him to now get another BoosterPlug for his bike.
He also fitted a BoosterPlug on the 650 Vulcan with heavier crank/flywheel. It was tricky to pull away with the Vulcan, he said, but after fitting a BoosterPlug the Vulcan is smooth. No more stalling and hesitation on pullaway.
The same BoosterPlug works on the 650 Versys.
He also fitted a BoosterPlug on the 650 Vulcan with heavier crank/flywheel. It was tricky to pull away with the Vulcan, he said, but after fitting a BoosterPlug the Vulcan is smooth. No more stalling and hesitation on pullaway.
The same BoosterPlug works on the 650 Versys.