1190r ACC1 and ACC2 questions

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

De Jager

Race Dog
Joined
Mar 24, 2011
Messages
523
Reaction score
0
Location
Pretoria
Bike
KTM 1190 Adventure
Hi guys, I know this might have been discussed many times.

I'm a novice when it comes to detail understanding of amps and volts but i can manage with some guidance.

I know acc1 is a 10amp fused unswitched power source and acc2 is switched1amp fused power source.
There is a batch at the 12v to the front and to the back.

My question is will the acc2  be enough to run a zumo 395 through the normal supplied garmin cable or must it rather come from the normal 10amp supply not to burn the 1amp fuse all the time. I do see the gps cable is already fused with a 2amp fuse. Will it then matter if i use acc2?

Otherwise i might as well use the normal 5pin relay with the acc2 as trigger acc1 as main power and split the outgoing power to gps and spotlights with a handlebarswitch on the spotlight positive.

 
Top