zebra
Bachelor Dog
- Joined
- Jun 23, 2008
- Messages
- 14,387
- Reaction score
- 990
- Bike
- BMW (all models)
WANTED: machine shop that can machine HDPE/Nylon, etc...
Runner (Offroad Cycles) and I share the selling of this 5L fuel cell (or 5L water cell) mount, which consists of:
UPPER HDPE part, which screws down into 5L fuel cell recess. (threaded)
LOWER HDPE part, which forms the base that the 5L fuel cell rests upon. (threaded)
STAINLESS STEEL m-a-i-n bolt dimensions: 16mm x 120mm
STAINLESSS STEEL NYLOCK dimensions: 16mm nut
MILD STEEL base plate dimensions 88mm x 5mm
2 x stainless steel cap-head bolts dimensions: 8mm x 20mm
1 x 'R' clip, 7cm long.
We need a 'machine shop' who can fabricate:
either the WHOLE unit...
OR
j-u-s-t the HDPE/Nylon parts (upper and lower) and WE will source the rest of the products, and do assembly.
thanks!
Chris & Team
021 510 6455
www.flyingbrick.co.za
[email protected]
Runner (Offroad Cycles) and I share the selling of this 5L fuel cell (or 5L water cell) mount, which consists of:
UPPER HDPE part, which screws down into 5L fuel cell recess. (threaded)
LOWER HDPE part, which forms the base that the 5L fuel cell rests upon. (threaded)
STAINLESS STEEL m-a-i-n bolt dimensions: 16mm x 120mm
STAINLESSS STEEL NYLOCK dimensions: 16mm nut
MILD STEEL base plate dimensions 88mm x 5mm
2 x stainless steel cap-head bolts dimensions: 8mm x 20mm
1 x 'R' clip, 7cm long.
We need a 'machine shop' who can fabricate:
either the WHOLE unit...
OR
j-u-s-t the HDPE/Nylon parts (upper and lower) and WE will source the rest of the products, and do assembly.
thanks!
Chris & Team
021 510 6455
www.flyingbrick.co.za
[email protected]