Welcome, Guest. Please Login or Register

Author Topic: Adhesive for galvanised sheet to metal?  (Read 583 times)

0 Members and 1 Guest are viewing this topic.

Offline ktmmer

Re: Adhesive for galvanised sheet to metal?
« Reply #20 on: February 21, 2019, 08:00:17 pm »
Huge variety of Sikaflex...depends what you wanna do ! or go the Chinese way and you will still contact me later after "the shit does not stick anymore"  :imaposer: :imaposer: :imaposer: :imaposer:

Some modern high performance cars have laminated panels, much stronger than spot welding or rivets.

Loose wimmen tightened here.
 

Offline Dunnes

  • Senior Member
  • ***
  • Bike: BMW F650GS / Dakar
    Location: Gauteng
  • Posts: 584
  • Thanked: 33 times
  • Name: Dickie Talma
Re: Adhesive for galvanised sheet to metal?
« Reply #21 on: March 08, 2019, 03:39:26 pm »
Thanks for all the input. It helps to calm my mind. I appreciate it.

So I have spoken to Draad. Seems Sikaflex will be the correct product.

This is one of the cupboards that I want to cover with galvanised sheeting on the sides and the back. The front will have wooden doors.
I think it will look better if the sheeting is glued to the inside of the frame. Maybe even paint it? What do you guys think?

The top is sleeper wood that I cut and joined. I still need to fill up the voids with a epoxy. I think it will look incredible.
If you ever need someone to cut up sleepers or big pieces into planks, I know someone in Honeydew, Jhb.
He sommer let me do the joining and sanding at his shop.
 

Offline Kortbroek

Re: Adhesive for galvanised sheet to metal?
« Reply #22 on: March 08, 2019, 03:47:53 pm »
Watse hout is daai sleeper? Lyk darem na te nice hout om sommer so buite te laat staan jong
- you reckon that thing will pop a wheelie? We're about to find out, SLAP that pig!
 

Offline Deon

  • Member
  • **
  • Bike: Honda XR650R
    Location: Western Cape
  • Posts: 419
  • Thanked: 9 times
  • Go go go.
    • http://roofs.co.za
Re: Adhesive for galvanised sheet to metal?
« Reply #23 on: March 12, 2019, 08:24:14 pm »
Rather use Chromadeck or Colorbond flat sheets.  Same as galvanized, but with a colour, and without the releasing oil. Or use Nu-tec boards.Looks nice and can be painted.   Almost like fascia boards. But much bigger.
XR500, DR600, TT600, XT600, XR600, XR650R,
Goldwing 1000, CBF, CBX, Varadero *2.
 

Offline Dunnes

  • Senior Member
  • ***
  • Bike: BMW F650GS / Dakar
    Location: Gauteng
  • Posts: 584
  • Thanked: 33 times
  • Name: Dickie Talma
Re: Adhesive for galvanised sheet to metal?
« Reply #24 on: March 12, 2019, 10:14:04 pm »
Die middelste plank is Rhodesian Teak en die kantstes is Ysterhout. Dis bietjie van n eksperiment, maar ek glo ek sal dit goed genoeg kan beskerm.
Watse hout is daai sleeper? Lyk darem na te nice hout om sommer so buite te laat staan jong