Author Topic: My Sidecar Project (Read 38840 times)

Tom van Brits · « **Reply #260 on:** July 23, 2019, 07:51:38 pm »

Doodskis sal mooi lyk, en lekker warm slaap

Gérrard · « **Reply #261 on:** July 23, 2019, 09:52:03 pm »

Rear sidecar mount done

Gérrard · « **Reply #262 on:** July 23, 2019, 09:53:09 pm »

Bits and pieces of the sidecar brackets for welding.

10Klr · « **Reply #263 on:** July 24, 2019, 11:43:50 am »

Keeping a a keen eye on this one! Cant wait to see this one riding around

Those 1150s look great with a car attached!

Gérrard · « **Reply #264 on:** July 24, 2019, 11:56:48 am »

Quote from: 10Klr on July 24, 2019, 11:43:50 am

Keeping a a keen eye on this one! Cant wait to see this one riding around

Those 1150s look great with a car attached!

Yip, have to remind myself all the time so slow down and take it easy. Already made some small mistakes due to impatience, but could fix it. That's what I love about metal.

So far I'm two months into the project and way ahead of schedule, but the slow time is coming There is still a shit load to do with lots of down time when I send parts away for finishing, like the shock that still has to go to Superfoxi for a rebuild and then designing building the tub.

Tiger8 · « **Reply #265 on:** July 24, 2019, 01:13:36 pm »

Quote from: Gérrard on July 23, 2019, 09:53:09 pm

Bits and pieces of the sidecar brackets for welding.

I tried to cleanup and order the parts to make a presentable photo, but the master doesn't like order........................like he likes measuring

Gérrard · « **Reply #266 on:** July 24, 2019, 01:26:47 pm »

Quote from: Tiger8 on July 24, 2019, 01:13:36 pm

Quote from: Gérrard on July 23, 2019, 09:53:09 pm
Bits and pieces of the sidecar brackets for welding.

I tried to cleanup and order the parts to make a presentable photo, but the master doesn't like order........................like he likes measuring

The world was created from chaos, and look what a beautiful place it is

woody1 · « **Reply #267 on:** July 24, 2019, 02:39:11 pm »

Kom mooi aan.... trots op julle TWINS

Gérrard · « **Reply #268 on:** July 24, 2019, 03:42:03 pm »

Quote from: woody1 on July 24, 2019, 02:39:11 pm

Kom mooi aan.... trots op julle TWINS

Ten spyte van, nienas gevolg van nie

Gérrard · « **Reply #269 on:** July 24, 2019, 08:42:38 pm »

Fitting the upper subframe brace, bolted on the crashbar mounts.

woody1 · « **Reply #270 on:** July 25, 2019, 07:19:30 am »

Nou daai is 'n goeie move..

Gérrard · « **Reply #271 on:** July 25, 2019, 09:05:27 am »

Quote from: woody1 on July 25, 2019, 07:19:30 am

Nou daai is 'n goeie move..

Ander ouens se slimmigheid wat ek mmaar net mooi copy

Ek heg my sidear nes in die prentjie met so paar mods laat dit lyk of ek ook slim is.

woody1 · « **Reply #272 on:** July 25, 2019, 09:09:33 am »

Net 'n vragie. op post Reply #261le die voorste mounting na voor and die agterste mounting na agter.
Ek dog die idee van die mounting is om die karretjie vorentoe of agtertoe te kan verskuif.
Sou gedink het altwee na voor of altwee na agter om dit te kan bewerkstellig.

Dis maar net die Brakpan vraag...daar is seker 'n Brakpan by die see antwoord op die een.

Gérrard · « **Reply #273 on:** July 25, 2019, 09:15:46 am »

Quote from: woody1 on July 25, 2019, 09:09:33 am

Net 'n vragie. op post Reply #261le die voorste mounting na voor and die agterste mounting na agter.
Ek dog die idee van die mounting is om die karretjie vorentoe of agtertoe te kan verskuif.
Sou gedink het altwee na voor of altwee na agter om dit te kan bewerkstellig.

Dis maar net die Brakpan vraag...daar is seker 'n Brakpan by die see antwoord op die een.

Kyk mooi. Die ontwerp is so mo driehoek te vorm vir sterk maak. Daar is twee slide clamps op elke mount. Hy kan vorentoe, agter toe, en in en uit skuif. 3-D verstelbaar Die mounts trek teen mekaar om stabiliteit te gee.

woody1 · « **Reply #274 on:** July 25, 2019, 09:31:13 am »

Het jy dit al verstel en gekyk of dit so werk...veral met daai middel mount.
Ek moet dit eers PRAKTIES sien gebeur..kan nie soos slim ingeneurs 'n simulated version aanvaar nie .

Gérrard · « **Reply #275 on:** July 25, 2019, 09:45:40 am »

Quote from: woody1 on July 25, 2019, 09:31:13 am

Het jy dit al verstel en gekyk of dit so werk...veral met daai middel mount.
Ek moet dit eers PRAKTIES sien gebeur..kan nie soos slim ingeneurs 'n simulated version aanvaar nie .

Dit is 'n getoetsde sisteem. Jy gebruik net 'n groot hammer. Maar dit sal nie nodig wees vir verstellings nie Ek sit hom sommer net van die begin af reg aanmekaar. Daai is maar net vir fancy wees dat dit professioneel lyk.

woody1 · « **Reply #276 on:** July 25, 2019, 09:47:42 am »

Nou kom die waarheid uit.

Gérrard · « **Reply #277 on:** July 25, 2019, 09:50:40 am »

Quote from: woody1 on July 25, 2019, 09:47:42 am

Nou kom die waarheid uit.

… en die prentjie tekenaar het dit goedgekeur, so dan moet dit kan werk.

Gérrard · « **Reply #278 on:** July 25, 2019, 07:52:03 pm »

Nou gaan ons daai sidecar aanmekaar moer

Gérrard · « **Reply #279 on:** July 25, 2019, 07:54:04 pm »

Got the brackets back from welding. Not the prettiest, but it ain't going to break.

Cross brace for the top subframe brace done.