Wishlist and For sale Thread

[Hardy de Kock]

Which PM2?

Not the one you want.
I have ordered 4 of the ones you want, and will let you know when it arrives.
I want it too, and have two friends that are also looking for them.

[Hardy de Kock]

@JohanP  have a few higher end folders for sale (including a Spyderco PM 2)
PM me if you are in the market for something really nice -
@Kilroy - We can talk about that War Admiral

PM 2 sold to Kelly 007

[mox]

@Hardy de Kock which PM2 have you ordered?

[Hardy de Kock]

@Hardy de Kock which PM2 have you ordered?

PM 2 in 204P steel in Micarta scales - 3 different colors (1 x avo, 1 x sand and 2 x denim)

[Rossdog]

I've just finished making this Damascus knife. 60 layers consisting of 1070 and 75ni8. Both are high carbon steels, 75ni8 being similar to15n20, but with a higher nickel content which gives a nice contrast against the 1070. Handle is fallow deer antler with brass bolster and pommel. Overall length is 250mm, and the blade is 126mm. Hand made leather sheath.

The Damascus is hand forged, no power hammer or hydraulic press, just an old fashioned hammer and anvil. Price: R3000.

[Wolzak]

A beautiful Knife, well done.

[Oshkosh]

I've just finished making this Damascus knife. 60 layers consisting of 1070 and 75ni8. Both are high carbon steels, 75ni8 being similar to15n20, but with a higher nickel content which gives a nice contrast against the 1070. Handle is fallow deer antler with brass bolster and pommel. Overall length is 250mm, and the blade is 126mm. Hand made leather sheath.

The Damascus is hand forged, no power hammer or hydraulic press, just an old fashioned hammer and anvil. Price: R3000.

Great skills, a real beutiful blade! You can Sir!

[bud500]

Kershaw Copper FS

http://www.wilddog.za.net/forum/index.php?topic=254816.new#new

[mox]

Wanted:
Spyderco Endela K390  not VG10

[desertfox]

 

[Bill the Bong]

I’m advertizing a couple of tactical folders. They were bought between 2005 and 2008. These have never been carried, never sharpened, never cut anything. Most actually have the original sales slip in the box - not the Cold Steel. I’m not overly motivated to sell, but they live in a safe, which is sort of dumb. I enjoy my old fashioned Opinels and Mams much more. And just because its advertised does not automatically mean I’ll actually sell it,

[Bill the Bong]

Numero uno:

Spyderco Native 111. Bought it in 2005

[Bill the Bong]

Next a CRKT M16. Bought in 2005. Please disregard the price on the box🤣

[Bill the Bong]

Last one Cold Steel Recon 1 Spear point half serrated edge

[Bill the Bong]

I'm not really convinced that this is the right place, but I'm looking for a knife making belt grinder.  I thought about importing a chassis and then DIY it further, but unusual stuff is tricky to get in Upington. So, I'm considering something like this:

 https://vormac.co.za/compact-grinder/

So, what have you available?  My number one requirement is availability of belts. Must be single phase.

I'm not really looking at the Ryobi/Adendorffs 25mm belt and disc jobs or 1x 30 and 2 x 42 upright machines.

[bud500]

I'm not really convinced that this is the right place, but I'm looking for a knife making belt grinder.  I thought about importing a chassis and then DIY it further, but unusual stuff is tricky to get in Upington. So, I'm considering something like this:

 https://vormac.co.za/compact-grinder/

So, what have you available?  My number one requirement is availability of belts. Must be single phase.

I'm not really looking at the Ryobi/Adendorffs 25mm belt and disc jobs or 1x 30 and 2 x 42 upright machines.

Also look at what KMTS  and Herbst offer. Both in Pretoria. All belts, spares and accesories available.

[Rossdog]

I'm not really convinced that this is the right place, but I'm looking for a knife making belt grinder.  I thought about importing a chassis and then DIY it further, but unusual stuff is tricky to get in Upington. So, I'm considering something like this:

 https://vormac.co.za/compact-grinder/

So, what have you available?  My number one requirement is availability of belts. Must be single phase.

I'm not really looking at the Ryobi/Adendorffs 25mm belt and disc jobs or 1x 30 and 2 x 42 upright machines.

I've made the agonising decision to sell my beloved KTM 300. If I do, I've decided I'm going to upgrade my belt grinder, which will mean my existing one will be up up for sale. Let me know if you're interested.

[Captain Zef]

Follow

[Bill the Bong]

I'm not really convinced that this is the right place, but I'm looking for a knife making belt grinder.  I thought about importing a chassis and then DIY it further, but unusual stuff is tricky to get in Upington. So, I'm considering something like this:

 https://vormac.co.za/compact-grinder/

So, what have you available?  My number one requirement is availability of belts. Must be single phase.

I'm not really looking at the Ryobi/Adendorffs 25mm belt and disc jobs or 1x 30 and 2 x 42 upright machines.

I've made the agonising decision to sell my beloved KTM 300. If I do, I've decided I'm going to upgrade my belt grinder, which will mean my existing one will be up up for sale. Let me know if you're interested.

@Rossdog   Sure thing, sommer post it here.  I'm poor, if its beyond my financial ability, somebody else might jump on it.

Appreciate it

[Rossdog]

  I'll take some pics tomorrow.