Author Topic: Tools to Sharpen your Toys (Read 2146 times)

KiLRoy · « **Reply #40 on:** February 14, 2020, 08:58:49 am »

@Tampan - ok ordered my blade buddy with 3 extra belts. 100, 400 and 1000 g. Do one use oil or water when grinding - or just dry?

Wayne · « **Reply #41 on:** February 14, 2020, 11:13:41 am »

Recently honed my Honey Badger. Last night I sliced a ripe tomato into very thin slices. Almost a perverse sense of pleasure

Sent from my SM-T825 using Tapatalk

Kortbroek · « **Reply #42 on:** February 14, 2020, 01:39:55 pm »

Quote from: Wayne on February 14, 2020, 11:13:41 am

Recently honed my Honey Badger. Last night I sliced a ripe tomato into very thin slices. Almost a perverse sense of pleasure

Sent from my SM-T825 using Tapatalk

There is something very satisfying in using a sharp knife.

Tampan · « **Reply #43 on:** February 17, 2020, 08:04:06 am »

Quote from: KiLRoy on February 14, 2020, 08:58:49 am

@Tampan - ok ordered my blade buddy with 3 extra belts. 100, 400 and 1000 g. Do one use oil or water when grinding - or just dry?

Morning Hein,
Sorry for the delay. I was in the Kalahari and we didn't have any reception there, so no internet. Hein, I don't use anything on the belt or blade when grinding/sharpening. I will keep some water close by when I do aggressive grinding, like putting on a new cutting edge or when I correct the angle on a cutting edge. Just to keep the blade cool by dipping it occasionally.

mox · « **Reply #44 on:** February 18, 2020, 07:37:53 am »

https://www.sharpeningsupplies.com/
Wish we had a local toy store like this one.
Although:
For grinding
http://www.gjsupplies.co.za/knife_making_machinery.html

Maybe Straatkat can point us in the right direction on sourcing machinery ?

Also looking to get a proper bench grinder

KiLRoy · « **Reply #45 on:** February 18, 2020, 04:22:30 pm »

Axe can now shave arm hair. Took 20. Two belts

I donno if i did it right. Got about a 8mm taper. Last 2mm is the edge at 25degrees. Blade buddy can go to 30 degrees

Mikie · « **Reply #46 on:** February 18, 2020, 06:13:39 pm »

Thats a nice axe, dont go making any axe wounds with that

KiLRoy · « **Reply #47 on:** February 18, 2020, 09:33:24 pm »

Mikey, I really enjoyed this. Kept me out of the pub too. Took the axe to the pub. Okes say i must start a business. Problem is two fold. The R500 margin is not worth the many hours and some things are just for joy, not money... so no

Mikie · « **Reply #48 on:** February 19, 2020, 04:34:48 pm »

They let you take it to the pub? Brave chaps at the pub

I dont see it a not worth it, its a hobby, you enjoyed it, all good

KiLRoy · « **Reply #49 on:** February 19, 2020, 08:31:01 pm »

Yeah, i was surprised too... given my history

KiLRoy · « **Reply #50 on:** February 20, 2020, 06:51:04 am »

Got A100, A45 (x3) and A16 belts. Think its 100, 400, 1000 grit? How use them for which?

briv · « **Reply #51 on:** February 21, 2020, 10:59:26 am »

Julle het my

https://www.adendorff.co.za/product/mac-afric-25-x-125-mm-belt-disc-sander/

Eerste lem is gesny en handle is aan met epoxy en twee rivets.......uit n ou rolsaag lem. Ek het toe maar die Adendorf een gekry want hy lyk nes joune Hein maar het nog in skuurder by vir 1000r minder.

KiLRoy · « **Reply #52 on:** February 21, 2020, 11:23:22 am »

Lekker Len!!!!

ek het hom gesien en wou koop - maar hy het nie die guide vir teen die regte hoek slyp nie ---- seker mens kan 'n plan maak. ek is egter 'n ongeluk wat wag om te gebeur so het to eerder die veilige roete gevolg. moes mieskien nie. goeie koop!!

WP · « **Reply #53 on:** February 21, 2020, 11:41:32 am »

Het enigeiemand al een van hierdie gebruik? Ek sien hy het 'n leer strop ook saam.

https://knifesharpners.co.za/product/multi-edge-220/

Vis Arend · « **Reply #54 on:** February 21, 2020, 01:40:50 pm »

Quote from: briv on February 21, 2020, 10:59:26 am

Julle het my

https://www.adendorff.co.za/product/mac-afric-25-x-125-mm-belt-disc-sander/

Eerste lem is gesny en handle is aan met epoxy en twee rivets.......uit n ou rolsaag lem. Ek het toe maar die Adendorf een gekry want hy lyk nes joune Hein maar het nog in skuurder by vir 1000r minder.

Lekker goedkoop die een.

Wys bietjie die lem.

briv · « **Reply #55 on:** February 21, 2020, 06:13:24 pm »

Quote from: Vis Arend on February 21, 2020, 01:40:50 pm

Quote from: briv on February 21, 2020, 10:59:26 am
Julle het my

https://www.adendorff.co.za/product/mac-afric-25-x-125-mm-belt-disc-sander/

Eerste lem is gesny en handle is aan met epoxy en twee rivets.......uit n ou rolsaag lem. Ek het toe maar die Adendorf een gekry want hy lyk nes joune Hein maar het nog in skuurder by vir 1000r minder.

Lekker goedkoop die een. Wys bietjie die lem.

Gaan kyk nou maar op die, what I made thread

grof soos 'n beer se alie...

briv · « **Reply #56 on:** February 22, 2020, 04:18:29 pm »

Fixed Heinie

nou kan ek 30-20 grade doen... Repurpose is a wonderful tool...

KiLRoy · « **Reply #57 on:** February 22, 2020, 06:36:15 pm »

Nou dis nou baie beter deal as myne. Welgedaan Len

KiLRoy · « **Reply #58 on:** February 23, 2020, 08:33:17 am »

How do one with an uneducated eye like mine measure the edge angle on a knife. In order to set my machine

Hardy de Kock · « **Reply #59 on:** February 23, 2020, 09:18:44 am »

Quote from: KiLRoy on February 23, 2020, 08:33:17 am

How do one with an uneducated eye like mine measure the edge angle on a knife. In order to set my machine

Krap met ń “sharpie” of highlighter op die edge.
Skat hom en skuur met die band wat die minste materiaal gaan wegvat.
Kyk op die edge of die ink geraak word en pas aan.