Welcome, Guest. Please Login or Register

Author Topic: One for the boffins - Hex Diagnostic on a 2018 GS LC  (Read 429 times)

0 Members and 1 Guest are viewing this topic.

Offline caconcepts

  • Senior Member
  • ***
  • Bike: BMW R1200GS Adventure
    Location: Gauteng
  • Posts: 862
  • Thanked: 61 times
    • Canvas & Aluminium Concepts
One for the boffins - Hex Diagnostic on a 2018 GS LC
« on: May 11, 2020, 03:00:36 pm »
Can somebody make any sense of the below, and no, it's not the battery.....

Fault Codes : 1
|
CD845F : CAN, node A, Vehicle-CAN, BusOff fault
Currently present : YES
Engine warning light (MIL) : NO
Frequency count : 3
Logistic(Healing) count : 40
..Fault Code History :
....Record number : 1
....Odometer : 15227.0 km
....ABS time : 16777215
....SAE Code : 0
....Vehicle speed : 0.0 km/h
....Gear : 0
....Motor temperature : 15.4 C
....Time since engine start : 0.00
....Record number : 2
....Odometer : 15227.0 km
....ABS time : 16777215
....SAE Code : 0
....Vehicle speed : 0.0 km/h
....Gear : 0
....Motor temperature : 15.4 C
....Time since engine start : 0.00
....Record number : 3
....Odometer : 15227.0 km
....ABS time : 16777215
....SAE Code : 0
....Vehicle speed : 0.0 km/h
....Gear : 0
....Motor temperature : 15.5 C
....Time since engine start : 0.00
DT50, XL500, F650GS Dakar, Honda NC700, F650CS, R1200GS, R1200GSA, K1200LT, G450X, G650XChallenge, WR450F, GS 1200 Rallye
 

Offline QuintenMarais

  • Newbie
  • *
  • Bike: BMW R1200GS Adventure
    Location: Western Cape
  • Posts: 23
  • Thanked: 3 times
Re: One for the boffins - Hex Diagnostic on a 2018 GS LC
« Reply #1 on: May 12, 2020, 04:27:32 pm »
Somewhere a controller is not transmitting data correctly or is failing.. A bus will go to a "bus off" state if a specific controller in the network generates to many errors ..

From what I've read a bus off error is normally proceeded by other errors, is there any other errors? has something happened recently?  :patch:

Also try searching for "CD845F CAN, node A, Fahrzeug-CAN, BusOff fault" (Fahrzeug = German for Vehicle)

Interesting reading :
https://www.kvaser.com/about-can/the-can-protocol/can-error-handling/

Good Luck  :thumleft:
« Last Edit: May 12, 2020, 04:28:04 pm by QuintenMarais »
 

Offline caconcepts

  • Senior Member
  • ***
  • Bike: BMW R1200GS Adventure
    Location: Gauteng
  • Posts: 862
  • Thanked: 61 times
    • Canvas & Aluminium Concepts
Re: One for the boffins - Hex Diagnostic on a 2018 GS LC
« Reply #2 on: May 13, 2020, 07:25:21 am »
Somewhere a controller is not transmitting data correctly or is failing.. A bus will go to a "bus off" state if a specific controller in the network generates to many errors ..

From what I've read a bus off error is normally proceeded by other errors, is there any other errors? has something happened recently?  :patch:

Also try searching for "CD845F CAN, node A, Fahrzeug-CAN, BusOff fault" (Fahrzeug = German for Vehicle)

Interesting reading :
https://www.kvaser.com/about-can/the-can-protocol/can-error-handling/

Good Luck  :thumleft:

Quinten,

After I ran the diagnostics again, I got this. your process would suggest that the gear selector sensor and shift level sensors are not talking to the controller.

XBMSO1
Motorcycle VIN: WB10A5104HZ621898

3A1183: Gear selector sensor, incomplete adaptation for gear shift assist The fault is currently present.
This problem occurred once.
Logistic counter: 0
MIL set: No
Fault code history:
ADC voltage Gear lever position sensor channel 2 1.25 V
Odometer 15227.0 km
ADC voltage Gear lever position sensor channel 1 2.54 V
Gear position sensor voltage, Sensor 1 0.72 V
ABS time 16777215.00
Angle of Gear lever position sensor adapted to Neutral 100.00 %
SAE Code 0.00

3A1194: Shift lever sensor, Adaptation did not finish The fault is currently present.
This problem occurred once.
Logistic counter: 0
MIL set: No
Fault code history:
SAE Code 0.00
ABS time 16777215.00
Odometer 15227.0 km
Unknown 655F

CD845F: CAN, node A, Vehicle-CAN, BusOff fault
The fault is currently present.
This problem occurred once.
GS-911 Fault Codes Report 2020-05-11 09:24:40 PM
Page 1 of 2
Logistic counter: 40
MIL set: No
Fault code history:
Vehicle speed 0.0 km/h
Odometer 15227.0 km
ABS time 16777215.00
SAE Code 0.00
Gear 0.00
Motor temperature 17.6 C 17.6 C
DT50, XL500, F650GS Dakar, Honda NC700, F650CS, R1200GS, R1200GSA, K1200LT, G450X, G650XChallenge, WR450F, GS 1200 Rallye
 

Offline Jughead

  • Old rail tunnel, Cradock.
  • Forum Whore
  • ****
  • Bike: BMW R1200GS Adventure
    Location: Eastern Cape
  • Posts: 5,491
  • Thanked: 202 times
  • Port Elizabeth
Re: One for the boffins - Hex Diagnostic on a 2018 GS LC
« Reply #3 on: June 06, 2020, 03:12:49 pm »
Somewhere a controller is not transmitting data correctly or is failing.. A bus will go to a "bus off" state if a specific controller in the network generates to many errors ..

From what I've read a bus off error is normally proceeded by other errors, is there any other errors? has something happened recently?  :patch:

Also try searching for "CD845F CAN, node A, Fahrzeug-CAN, BusOff fault" (Fahrzeug = German for Vehicle)

Interesting reading :
https://www.kvaser.com/about-can/the-can-protocol/can-error-handling/

Good Luck  :thumleft:

Quinten,

After I ran the diagnostics again, I got this. your process would suggest that the gear selector sensor and shift level sensors are not talking to the controller.

XBMSO1
Motorcycle VIN: WB10A5104HZ621898

3A1183: Gear selector sensor, incomplete adaptation for gear shift assist The fault is currently present.
This problem occurred once.
Logistic counter: 0
MIL set: No
Fault code history:
ADC voltage Gear lever position sensor channel 2 1.25 V
Odometer 15227.0 km
ADC voltage Gear lever position sensor channel 1 2.54 V
Gear position sensor voltage, Sensor 1 0.72 V
ABS time 16777215.00
Angle of Gear lever position sensor adapted to Neutral 100.00 %
SAE Code 0.00

3A1194: Shift lever sensor, Adaptation did not finish The fault is currently present.
This problem occurred once.
Logistic counter: 0
MIL set: No
Fault code history:
SAE Code 0.00
ABS time 16777215.00
Odometer 15227.0 km
Unknown 655F

CD845F: CAN, node A, Vehicle-CAN, BusOff fault
The fault is currently present.
This problem occurred once.
GS-911 Fault Codes Report 2020-05-11 09:24:40 PM
Page 1 of 2
Logistic counter: 40
MIL set: No
Fault code history:
Vehicle speed 0.0 km/h
Odometer 15227.0 km
ABS time 16777215.00
SAE Code 0.00
Gear 0.00
Motor temperature 17.6 C 17.6 C

Clear all the fault codes.  Then reset the adaptations.  Take the bike for a ride and rerun the Autoscan.

It would appear that the adaptations failed as there was still an active fault in the system.
I came here to drink milk and kick arse!  And i've just finished my milk.
http://www.dsmc.co.za        http://www.triumphowners.com/to-car/mkiii/
Supplier of Ticket to the Moon Hammocks   http://www.ticketothemoon.com             
 

Offline caconcepts

  • Senior Member
  • ***
  • Bike: BMW R1200GS Adventure
    Location: Gauteng
  • Posts: 862
  • Thanked: 61 times
    • Canvas & Aluminium Concepts
Re: One for the boffins - Hex Diagnostic on a 2018 GS LC
« Reply #4 on: June 08, 2020, 01:39:04 pm »
Thanks for that, however, the errors were constantly present an could not be cleared. Bavarian BMW sorted it out for me with their super uber computer...
DT50, XL500, F650GS Dakar, Honda NC700, F650CS, R1200GS, R1200GSA, K1200LT, G450X, G650XChallenge, WR450F, GS 1200 Rallye