Welcome, Guest. Please Login or Register

Author Topic: ianb's 701  (Read 2315 times)

0 Members and 1 Guest are viewing this topic.

Offline Dolf

  • Race Dog
  • ***
  • Bike: Husqvarna (all models)
    Location: Gauteng
  • Posts: 1,684
  • Thanked: 18 times
  • .
Re: ianb's 701
« Reply #80 on: March 01, 2021, 12:00:46 pm »
So i rode my bike over the weekend and it performed well with the Golan filter and removing the in tank filter. But i am scared the Golan filter area is a bit small so have decided to re fit a in tank filter. I found these from Midas for R25. It matches  what came out. From a dealer in Cape town.  It is a high pressure 10 micron filter. The clamp sizes for the in tank filter are 9mm to 11mm.

The Golan filter is much larger than the white in-line OEM filter at the quick disconnect so I wouldn't worry about it.
 

Offline adamktm

Re: ianb's 701
« Reply #81 on: March 19, 2021, 09:41:31 am »
Hi Ian

Thanks for the explanation. I will have a look at the filter setup. I would be interested in one of those springs when you get them.

So I finally got around to sorting this out. I did it slightly differently though. When I took the filter and cage off I noticed the filter housing has 2 "ears" on either side so I shaped the cage to sit on those and bonded it in place with some 11FC.

2018 KTM 250 6 Days TPI
2011 690 Enduro

When I bleed, I bleed orange!
 

Offline ianb

  • Race Dog
  • ***
  • Bike: Husqvarna (all models)
    Location: Kwazulu Natal
  • Posts: 1,938
  • Thanked: 74 times
  • Husqvarna 701. KTM 790R
    • BLOMEYERS
Re: ianb's 701
« Reply #82 on: March 20, 2021, 09:36:38 am »
I have given up on the spring idea. The plastic fence is working just perfectly for now.