Welcome, Guest. Please Login or Register

Author Topic: Ktm 690 top.dead center tool  (Read 304 times)

0 Members and 1 Guest are viewing this topic.

Offline geopat

  • Race Dog
  • ***
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 589
  • Thanked: 60 times
Ktm 690 top.dead center tool
« on: January 20, 2021, 06:39:46 am »
Hey guys can anyone send.me.a picture or a basic drawing of the ktm tool used to fix the engine at TDC that screws into the casing I want to turn a couple up on the lathe, if a successful drawing is given I will turn some extras and give to WD members
 

Offline Jughead

  • Old rail tunnel, Cradock.
  • Grey hound
  • ****
  • Bike: BMW R1200GS Adventure
    Location: Eastern Cape
  • Posts: 5,766
  • Thanked: 257 times
  • Port Elizabeth
Re: Ktm 690 top.dead center tool
« Reply #1 on: January 20, 2021, 06:58:53 am »
You do not need a drawing for that.

80mm long piece of 8 X 1.25 threaded rod with a 45į chamfer on the one end and a slot in the other end.

I came here to drink milk and kick arse!  And i've just finished my milk.
http://www.dsmc.co.za        http://www.triumphowners.com/to-car/mkiii/
Supplier of Ticket to the Moon Hammocks   http://www.ticketothemoon.com             
 

Offline geopat

  • Race Dog
  • ***
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 589
  • Thanked: 60 times
Re: Ktm 690 top.dead center tool
« Reply #2 on: January 20, 2021, 07:08:15 am »
Well shit that's a bit more boring than I expected haha but.nonetheless I will make a few up for WD members out.of ss Allen cap bolts thanks for the info but the place that the.bolt goes into is that just a 45 degree dimple or is it a hole perhaps a shallower angle would be better?
 

Offline ClimbingTurtle

  • Forum Vendor
  • Grey hound
  • ****
  • Bike: BMW (all models)
    Location: Gauteng
  • Posts: 8,365
  • Thanked: 417 times
  • Give It Horns - Save Our Rhino's
    • Majita Tool Supplies
Re: Ktm 690 top.dead center tool
« Reply #3 on: January 20, 2021, 07:14:22 am »
Trust @Jughead  - its a locking tool, just locates in a slot.

The X-Challenge uses the same principle, I used a M8x60 Cap screw and an angle grinder....
www.majita.co.za - we sell tools!

"And if I knew I was going to be this thirsty, I would have drunk more last night"

2010 R1200GS Adventure SOLD - 2007 BMW G650x  - 2001 F650GS Dak SOLD - 1981 XT500 - 1980 XT500 - Gone to Mud Island for a better life with Roadcat the Lordly, Keeper of the Mead...!
 

Offline geopat

  • Race Dog
  • ***
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 589
  • Thanked: 60 times
Re: Ktm 690 top.dead center tool
« Reply #4 on: January 20, 2021, 07:25:21 am »
Righto that's good enough for me I'll knock a few out this arvo can't believe KTM wants to charge for this haha
 

Offline adamktm

Re: Ktm 690 top.dead center tool
« Reply #5 on: January 20, 2021, 09:32:19 am »
Hi Geopat

I'd be keen on buying one off of you. I can fetch at the same time as the filter  :thumleft:
2018 KTM 250 6 Days TPI
2011 690 Enduro

When I bleed, I bleed orange!
 

Offline HappyEnding

  • Pack Dog
  • **
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 96
  • Thanked: 14 times
  • MorningGlory
Re: Ktm 690 top.dead center tool
« Reply #6 on: January 20, 2021, 11:16:40 am »
I would also like a tool please
R9T Scrambler
690 Enduro
350 EXC-F
250 TPI & 300 XCW 
Beta Factory 250 2T trials & madAss 125
 

Offline geopat

  • Race Dog
  • ***
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 589
  • Thanked: 60 times
Re: Ktm 690 top.dead center tool
« Reply #7 on: January 20, 2021, 02:49:53 pm »
Sorry gents got delayed fetching boskak Bruce's klr for a friend I'll post once the bits are made
 

Offline geopat

  • Race Dog
  • ***
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 589
  • Thanked: 60 times
Re: Ktm 690 top.dead center tool
« Reply #8 on: January 21, 2021, 08:49:09 pm »
Well they are nothing spectacular but I did say I would  and they should do the job M8x100 stainless bolts with 45 deg point turned,re tapped and de greased got 6 here free to whoever's collects in parklands Cape Town
 

Offline Amsterdam

  • Race Dog
  • ***
  • Bike: KTM 890 Adventure R Rally
    Location: Western Cape
  • Posts: 1,625
  • Thanked: 131 times
Re: Ktm 690 top.dead center tool
« Reply #9 on: January 22, 2021, 06:34:48 am »
I would like to collect one of these nifty bolts from you please. Will PM you.
KTM 500 XCW, Husqvarna 701, KTM 890 Rally
 

Offline Gianpiero

Re: Ktm 690 top.dead center tool
« Reply #10 on: January 24, 2021, 04:27:29 pm »
Ah please could I have one. If someone could ever be so kind and fetch me one and postnet it to me. Iíll pay for posting cost. Please


Sent from my iPhone using Tapatalk
 

Offline geopat

  • Race Dog
  • ***
  • Bike: KTM 690 Adventure
    Location: Western Cape
  • Posts: 589
  • Thanked: 60 times
Re: Ktm 690 top.dead center tool
« Reply #11 on: January 25, 2021, 07:13:29 pm »
Ah please could I have one. If someone could ever be so kind and fetch me one and postnet it to me. Iíll pay for posting cost. Please

its just a pointy bolt mate you sure you want the hassle?


Sent from my iPhone using Tapatalk