New CS sprocket, output shaft more resistance

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sidetrack

Grumpy Mutt
Joined
Jan 30, 2006
Messages
23,361
Reaction score
5,648
Location
Pretoria
So I fitted a PBR cs sprocket, 15 tooth correct model nice tight fit. When I tried to put the circlip on there was just not enough space but it was close. I could see a slight gap between the shaft and sprocket so I tapped the circlip in place with a big flat screwdriver and it slipped into the groove. But when I turn on the countershaft with my fingers I feel more resistance than before, like the sprocket is pushing harder on the bushing / spacer between itself and the gearbox. Anyone experience this ?
 
Top