DEON 1190
Race Dog
- Joined
- Sep 5, 2018
- Messages
- 607
- Reaction score
- 379
- Bike
- KTM 1190 Adventure
At first it was intermittent , " FRONT BRAKE SWITCH FAILURE" I would unplug it , spray with WD40 , hoping to get the lube inside , and the error would be gone for a while , now it looks like the switch has finally given up, spray not working by the looks of it , every ride now the error comes back . So my question is " switch nor serves able , and cost a whopping R800.00 for a new one , what is plan Z ?
The switch cant be opened , and it looks like the pin goes back in skew and then does not make contact, As a last ditch I am going to try and get lube past the little rubber seal , not sure if previous lubes attempts got in .
As for plan Z , from research this BREMBO switch seems commonly used by most manufactures and replacemt only option , not sure if the priced the same , internet shows it as 30-40 euro
The switch cant be opened , and it looks like the pin goes back in skew and then does not make contact, As a last ditch I am going to try and get lube past the little rubber seal , not sure if previous lubes attempts got in .
As for plan Z , from research this BREMBO switch seems commonly used by most manufactures and replacemt only option , not sure if the priced the same , internet shows it as 30-40 euro
