Brinkman
Pack Dog
Hi ladies and gents.
I have My 2001 Yamaha YZ125 for sale. Reason being I had an accident at work where I lost the first joint of my ring finger and I'm not enjoying the off road riding anymore.
The plan was to keep it after the rebuild, but sadly things is not working out like planned. During the build I was working at Dirtrider motorcycles as an apprentice so I did all the work in an obsessive manner.
Total personal cost of project is standing at R27000 and my asking price is R19800. Bike is really like new condition and guaranteed better condition than 90% of bikes out there. No corners were cut and all top quality parts used.
Down below is the long list of work done with invoices on request. Just need to get them all on the PC.
2001 Yamaha YZ125 projek
Carb needle en seat@
Carb clean@
Carb float height@
Carb overflow pype@
Brieke bloei@
Exhaust spyt@
Exhaust pop rivet@
Suspensie setup@
Suspensie bearings herstel/diens@
Powervalve gasket@
Power valve shaft seëls@
Power valve skoon maak@
Power valve cover rubber seël@
Powervalve herstel@
Paint strip frame@
Spray frame@
Buff frame@
Waterpomp shaft/gear@
Waterpomp bearing@
Waterpomp 2x seëls@
Waterpomp circlip@
Waterpomp waster@
Crank seël RH@
Crank case cover gasket@
Headstem rethread@
Headstem custom nut@
Tenk rubber + grommet@
Swingarm plug@
Radiator finne@
Seat cover custom NITHRONE@
Seat spons reshape NITHRONE@
Clutch boss lock washer@
Clutch basket gefeil@
Waterpomp gasket@
Clutch cover gasket@
Ufo frame protectors@
Hex boude vir pv cover@
Long rangeTenk@
Pro Taper fat bars@
Handlebar raisers@
2015 YZ voor fender@
Fork bleeders@
Main bearings + seëls (hotrods)@
Conrod kit (hot rods)@
Crank rebuild JANNIE 2 STROKE@
Cases sleeve JANNIE 2 STROKE@
Cases weld + tap JANNIE 2 STROKE@
Piston kit (wiseco)@
Barrel resleeve JANNIE 2 STROKE@
Full gasket/oring set@
Clutch cover weld@
Kickstarter spring@
Kick idler gear circlips + washer + herstel@
Boil bottle mod@
Carb o-ring@
Grips@
Swingarm bearings@
Air filter@
Petrol filter@
Sparkplug@
Motul gearbox olie@
FMF Exhaust packing@
Cycra handguard plastics@
Motul Fork oil@
Putoline coolant@
Fork dampener rubbers@
Skidplate@
Front number board 2015 OEM@
Radiator shrouds UFO@
Side number boards UFO@
Front fender UFO@
Rear fender UFO@
Clutch cover spray@
15.2 hours first startup
18.5 hours current hour meter reading.
That is only the work that I have done, before I got it the suspension (front and rear) was serviced by DirtRider.
This is really with great sadness that I'm selling.
I'm based in Kuilsrivier in the Western Cape
Regards
Brinkman
I have My 2001 Yamaha YZ125 for sale. Reason being I had an accident at work where I lost the first joint of my ring finger and I'm not enjoying the off road riding anymore.
The plan was to keep it after the rebuild, but sadly things is not working out like planned. During the build I was working at Dirtrider motorcycles as an apprentice so I did all the work in an obsessive manner.
Total personal cost of project is standing at R27000 and my asking price is R19800. Bike is really like new condition and guaranteed better condition than 90% of bikes out there. No corners were cut and all top quality parts used.
Down below is the long list of work done with invoices on request. Just need to get them all on the PC.
2001 Yamaha YZ125 projek
Carb needle en seat@
Carb clean@
Carb float height@
Carb overflow pype@
Brieke bloei@
Exhaust spyt@
Exhaust pop rivet@
Suspensie setup@
Suspensie bearings herstel/diens@
Powervalve gasket@
Power valve shaft seëls@
Power valve skoon maak@
Power valve cover rubber seël@
Powervalve herstel@
Paint strip frame@
Spray frame@
Buff frame@
Waterpomp shaft/gear@
Waterpomp bearing@
Waterpomp 2x seëls@
Waterpomp circlip@
Waterpomp waster@
Crank seël RH@
Crank case cover gasket@
Headstem rethread@
Headstem custom nut@
Tenk rubber + grommet@
Swingarm plug@
Radiator finne@
Seat cover custom NITHRONE@
Seat spons reshape NITHRONE@
Clutch boss lock washer@
Clutch basket gefeil@
Waterpomp gasket@
Clutch cover gasket@
Ufo frame protectors@
Hex boude vir pv cover@
Long rangeTenk@
Pro Taper fat bars@
Handlebar raisers@
2015 YZ voor fender@
Fork bleeders@
Main bearings + seëls (hotrods)@
Conrod kit (hot rods)@
Crank rebuild JANNIE 2 STROKE@
Cases sleeve JANNIE 2 STROKE@
Cases weld + tap JANNIE 2 STROKE@
Piston kit (wiseco)@
Barrel resleeve JANNIE 2 STROKE@
Full gasket/oring set@
Clutch cover weld@
Kickstarter spring@
Kick idler gear circlips + washer + herstel@
Boil bottle mod@
Carb o-ring@
Grips@
Swingarm bearings@
Air filter@
Petrol filter@
Sparkplug@
Motul gearbox olie@
FMF Exhaust packing@
Cycra handguard plastics@
Motul Fork oil@
Putoline coolant@
Fork dampener rubbers@
Skidplate@
Front number board 2015 OEM@
Radiator shrouds UFO@
Side number boards UFO@
Front fender UFO@
Rear fender UFO@
Clutch cover spray@
15.2 hours first startup
18.5 hours current hour meter reading.
That is only the work that I have done, before I got it the suspension (front and rear) was serviced by DirtRider.
This is really with great sadness that I'm selling.
I'm based in Kuilsrivier in the Western Cape
Regards
Brinkman
