blazes
Grey Hound
- Joined
- Aug 10, 2007
- Messages
- 9,684
- Reaction score
- 10
- Location
- Faerie Glen
- Bike
- Husqvarna (all models)
I have a few Husky spares still available as i have sold quite a bit of them already.
This is all new and still sealed. Dont ask for photos as they still sealed and if you don't know what they are --move on >
1 x new new intake duct from EFI to airbox connector 2008 or fuel injected 610 motors - R 450
Rear shock Flap that protects shock absorber . - R200
Rear stay 610 TE 2008 complete under back fender ( Black plastic.)that holds all the back parts and can attach number plate tail light etc - R 400
Front wheel pick up speedo wire that comes on disc .R 250
1 Pair new cam bushes - R 150 for the pair.
4 x new special valve setting screws with back nuts and swivel bottoms that fit on cam - R 350.00 for the set.
Two new Valve cover gaskets R50 for both
Thin T hose that connects both radiators. R 200
1 set of aftermarket clutch spring retainers that straatkat made R 250
1 x new standard 610 side stand R 150
2 pairs new standard footpegs. R 200 per pair.
I x original rear number plate holder. R20
2 new left and 1 x right hand mirrors R150 each
1 pair original plastic radiator clip in protectors R50.
That is the new spares. Will post the 2nd hand ones later. Contact me on 082 545 7566 as i seldom look at my mail.
This is all new and still sealed. Dont ask for photos as they still sealed and if you don't know what they are --move on >
1 x new new intake duct from EFI to airbox connector 2008 or fuel injected 610 motors - R 450
Rear shock Flap that protects shock absorber . - R200
Rear stay 610 TE 2008 complete under back fender ( Black plastic.)that holds all the back parts and can attach number plate tail light etc - R 400
Front wheel pick up speedo wire that comes on disc .R 250
1 Pair new cam bushes - R 150 for the pair.
4 x new special valve setting screws with back nuts and swivel bottoms that fit on cam - R 350.00 for the set.
Two new Valve cover gaskets R50 for both
Thin T hose that connects both radiators. R 200
1 set of aftermarket clutch spring retainers that straatkat made R 250
1 x new standard 610 side stand R 150
2 pairs new standard footpegs. R 200 per pair.
I x original rear number plate holder. R20
2 new left and 1 x right hand mirrors R150 each
1 pair original plastic radiator clip in protectors R50.
That is the new spares. Will post the 2nd hand ones later. Contact me on 082 545 7566 as i seldom look at my mail.
