Husky 610 TE

[adv]

My current raiser situation. Id prefer just the fat bars but this will have to do in the mean time.

[HK]

Thanks guys , bike starts and took it for a ride all seems fine , but i am still in two minds about the pump  ,will see if it happens again

[blazes]

Hi Blazes

Those bikes look sweet !! , thanks for the info , pump does come on but it did to start sound funny during the ride , wil have a look . Do u maybe now if i can get a new pump locally ?

New pump locally --Nope --I brought in from Cycle works under R1k ------ locally they want 6.5k for the complete unit --Just also check if the pump is clipped into position and best put a cable tie to hold it in place --- they like to come undone and cause havoc if you ride the bike over very rough terrain --

Thank's 

[BiG DoM]

Thanks guys , bike starts and took it for a ride all seems fine , but i am still in two minds about the pump  ,will see if it happens again

My guess is all fine now.  Do not sweat the pump just yet!

[HK]

Thanks guys , bike starts and took it for a ride all seems fine , but i am still in two minds about the pump  ,will see if it happens again

My guess is all fine now.  Do not sweat the pump just yet!

Took bike for a hour ride around town and all is good now ! , those bloody wires !! . I did reroute them to prevent this happening again !!

Thanks for all the help with this.

I want to  put a bigger sprocket at the back ,  I am thinking of 48 ? Or should i go bigger front to , the standard gearing is to tall. What u guys think ?

[BiG DoM]

Thanks guys , bike starts and took it for a ride all seems fine , but i am still in two minds about the pump  ,will see if it happens again

My guess is all fine now.  Do not sweat the pump just yet!

Took bike for a hour ride around town and all is good now ! , those bloody wires !! . I did reroute them to prevent this happening again !!

Thanks for all the help with this.

I want to  put a bigger sprocket at the back ,  I am thinking of 48 ? Or should i go bigger front to , the standard gearing is to tall. What u guys think ?

Pleasure boet - pleased I could help 

I have a 47 rear and seems to be a good balance - also gives good wear stats with the 15 front (the standard 15/45 is actually weak in this regard). Check out Gear Commander website for all the info and specs.

[wolf skaap]

Hiers 'n ou video clippie van jou HK.
Niks technical nie.. die wereld is net so mooi daarso ek dag ek neem jou sommer af:
<a href="http://www.youtube.com/v/jI-IyD1CPJc" target="_blank" class="new_win">http://www.youtube.com/v/jI-IyD1CPJc</a>

[sidetrack]

Hiers 'n ou video clippie van jou HK.
Niks technical nie.. die wereld is net so mooi daarso ek dag ek neem jou sommer af:
<a href="http://www.youtube.com/v/jI-IyD1CPJc" target="_blank" class="new_win">http://www.youtube.com/v/jI-IyD1CPJc</a>

Yoh lekker ryplek daai ! Was ek al daar ? Lyk heel anders met al die groenigheid.

[wolf skaap]

Hiers 'n ou video clippie van jou HK.
Niks technical nie.. die wereld is net so mooi daarso ek dag ek neem jou sommer af:

Yoh lekker ryplek daai ! Was ek al daar ? Lyk heel anders met al die groenigheid.

Nee jy was nog nie

[HK]

Bike ready for new owner , wish I could keep both

[HK]

The new beast 2010 yz 450 with WR box !!

[BiG DoM]

The new beast 2010 yz 450 with WR box !!

Ja very different beast - going to keep you real busy in the cockpit 

[sidetrack]

The new beast 2010 yz 450 with WR box !!

Nice bike, which one is faster 

[wolf skaap]

The new beast 2010 yz 450 with WR box !!

I commend your modesty. Rumour has it that the pervious owner spent in excess of 120K on that YZ.
The question on everyone's lips is; "will it hang with the CRF?"

[HK]

Jy weet meer van die bike as ek !!

[wolf skaap]

Jy weet meer van die bike as ek !!

True to form