Adventure screen on normal gs

[Weedkiller - Adie]

Die rockfox bars lyk ook soos die GSA.  Hulle het nou i Spotlight monteer plek ook
 

[Driffie]

Die rockfox bars lyk ook soos die GSA.  Hulle het nou i Spotlight monteer plek ook
 

dit lyk net soflippen mooi   

[Marc D]

Hey W@nted. A few years ago i did the same mod on my 06 gs. For the supporting bracket, which cost as much as the screen at the time, i sourced a 10 mm aluminium rod, cut two pieces of 190 mm and attached electrical lugs on both ends and attached to screen with stainless allen screws and lock nuts.  The rods i needed to file down slightly to ensure s snug fit. Much cheaper and no problem. As mentioned the wings also need to be added as the turbulance is irritating.    

[Marc D]

Ek het n beter foto hieby. (Sukkel met beligting- dis nog donker in Krugersdorp ) Aan die boonste bout kon ek my Gps bracket ook monteer.

[MickeyT]

Sub 

[Weedkiller - Adie]

Hi
Ek het 'n groter perspex vir my gemaak (Selfde profiel as die bestaande een) en moet se dit is heelwat stiller in die helmet.  Ek het selfs die laaste 300 odd km sonder proppe in die ore gery. (elke keer my gat afgeskrik as die foon kliphard in my ore lui)

Ek moes al die twee M5 boute wat die skerm aan die voorkant vassit met wassers versterk omdat die druk op die skerm nou heelwat meer is. Ek het al gewonder hoe om die skerm aan die agterkant the verstewig. Marc D dit is 'n briljante oplossing.  Ek is gelukkig om draaibank ens te he so sal die alu rod af draai sodat dit 'n 'press fit' in die 'lug' is.

Dankie dat ek jou idee kon 'steel'.

Adie
Laat ons stof maak.

[Marc D]

Hi Adie. Als in orde   Ek het ook rubber grommets orals gebruik waar die boute deurgaan net om vibrasie te absorbeer.  N Draaibank sal baie help om als mooi te laat pas. Die wind van voor druk die hele storie in elk geval vas so dis eintlik nie eers nodig om die lugs vas te gom of soldeer nie, as als mooi pas . Sterkte.

[Manic]

BESLIS die moeite werd!!!

3. kry die "vlerkies" aan die kante ook. dis die moeite werd. sonder dit waai daar n wind van onder af by jou ken in jou helmet in namate die wind om die skerm waai.

Ons verkoop die Vlerkies, R400 per stel.

Cheers
Chris & Team

Met die boutjies en rubber washers ook? Of net dei vlerkies?

[zebra - Flying Brick]

anyone remember this shop's name/number, or else the WD name?

I DID phone them in early December, owner was away on a trip, but then never got back to me, so now it's a little urgent...!

thanks
Chris & Team

[manta]

Hi

I was looking for the bracket, if anyone else is looking, this place stocks them and are currently making new stock;
Offroad cycles
Tel: +27 (0) 12 653 4459
Martin Dudley: Business Manager
Unit 6 | Diamond park | 92 Jakaranda street | Hennops Park | Centurion

As mentioned they currently do not have stock but will be getting in their new shipment next week.

Cheers
M

[zebra - Flying Brick]

We have stock: R750 for the bracket - it is VERY well made and finished - you just need to sort your own bolts.

Cheers
Chris

[maverick64]

BUMP to Flying Brick!
Chris, do you guys still stock the aftermarket bracket as abvoe?

[zebra - Flying Brick]

Quote from: maverick64 on Today at 11:18:34 am>BUMP to Flying Brick!
Chris, do you guys still stock the aftermarket bracket as above?

I have asked my Sales guys to see if they can track down one for you...

Cheers 

Chris & Team