Dakar - break in the wiring loom - How to fix

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

alexTH3man

Race Dog
Joined
Sep 20, 2009
Messages
779
Reaction score
0
Location
Somerset West
Bike
AJS (all models)
I have posted this in bobnobs thread a while ago - but i have noticed more people are experiencing similar problems (yet another WEAK point in the Dakar). i hope you don't mind me reposting it to make searching easier.

dsc00114na.jpg


my bike was giving me some problems, and the symptoms were simple.  i turned the bars and EVERYTHING went off....  so i stripped the bike down a bit to see if i could find the problem.

I then pin pointed where the problem was. the loom that runs from the bottom of the ignition was messing around.  i cut the loom open to find a wire had broken clean in two.  simple fix, just soldered a bit of extra wire in, and moved the loom for more free play.

this was due to the wire getting old, and just breaking clean in two.

dsc00113wv.jpg


dsc00111we.jpg







 
Top