Yami 900
Race Dog
- Joined
- Oct 18, 2008
- Messages
- 3,049
- Reaction score
- 1
- Bike
- Yamaha Super Tenere
Hi Guys,
Here is some info. There was a thread more than 120days ago, so thought I just make a new one :thumleft:
I went to Bike2Bike and asked for assistance with regarding pairing of a few units. As I have a Black Berry and a Ipod and want to listen to music on my Ipod and not have all on my phone.
So spoke to Janet and she said she has the info for me and did all my pairing for me and it works. :thumleft: The info that is below is not all in the manual, as Janet has been playing with these models for some time.
If you have any problems, contact here at B2B and she is very helpful. :thumleft:
If you want it per word doc, send me a PM with email address and I can email it to you!
:mwink: :biggrin: ;D
Pairing 1 Interphone F4 with cell phone, IPOD (with dongle attached) and intercom (another F4)
FIRST : Pair each individual item with the interphone F4 as per instruction manual Page 32 and 33. So Pair the 2 interphones. Turn off both interphones. Pair the cellphone. Turn off Interphone, and then pair the IPOD dongle (while attached to and playing the IPOD).
Put both F4s off.
Disable BT on cellphone.
Put both F4s ON. (slow blue flashing light - NOT paired which is solid blue light).
Play music on Interphone 1 , when music playing hold button on Interphone 2 for 2 seconds.
The music stops and the intercom is on. When finished on intercom, on Interphone 1, press MFB for 1 second only and it goes back to music after 3 to 4 seconds.
Enable BT on cellphone - phone asks do you want to connect to Interphone ? Say YES. (this is phone dependant not all phones are the same, tests done on Blackberry BOLD)
Phone and intercom and music now all active.
To switch between functions…
MFB button:
1 second press on MFB = disconnecting Intercom and replaying music (after 2-3 seconds of silence)
2 second press on MFB = intercom mode on
To take a call, you will hear phone ring in ears if in INTERCOM/MUSIC mode, press MFB once to answer call. Wait till call finished DO NOT end call, wait for caller to put down phone and music/intercom resumes.
Listening to music and want to talk with Intercom, press MFB button for 2 seconds, intercom resumed. When finsihed intercom press MFB for 1 second and music resumes.
Light sequence:
Red blue flashing light = pairing mode
Red light = Switching off
Green light = charging
Playing music from IPOD = slowy rythmically flash on off BLUE
Standy mode = BLUE light flashes every 5 seconds
PAIRED intercom mode= Solid BLUE light
Pairing the Interphone F4:
3.1 Telephone function
To answer a call: as a call comes in, the speaker
produces a warning sound or the telephone’s
ring: to answer, simply press and release the MFB
button.
To end a call: to end a call, simply press and release the MFB
button.
Vocal call: some telephones allow you to make a vocal call
simply by pressing and releasing the MFB button.
To refuse a call: to refuse the call, press and hold the MFB
button for approximately 4 seconds.
To refuse a call in VOX mode, follow the instructions given in
the VOX FUNCTION section.
Volume adjustment: to adjust the volume, press the buttons
Volume + or Volume -, depending on the desired volume
level.
3.2 Intercom function
To enable intercom function: to enable the
conversation in an intercom profile, press the
MFB button on one of the two INTERPHONE
F4s, and hold for about 3 seconds. An audible
warning will advise you when connection has occurred.
Conversation in intercom mode is full-duplex.
To disable intercom function: to disable intercom function,
simply press and release the MFB button.
Volume adjustment: to adjust the volume, press the buttons
Volume + or Volume -, depending on the desired volume
level.
3.3 Stereo function (A2DP)
Use of stereo A2DP profile of the
telephone with INTERPHONE F4:
if the telephone has a Stereo A2DP
profile, it can be used as musical player,
connecting it up to INTERPHONE F4. To enable musical
playing, please consult the telephone instruction manual.
To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
Use of a musical player with INTERPHONE F4:
a musical player other than the telephone, with BluetoothR
technology, can be used: to connect it up, follow the instructions
for the pairing of INTERPHONE F4 and refer to the musical
player manual.
3.4 Music remote control
• Play/Pause: press and release the MFB button
twice.
• Rew: press and hold the Volume - button for
3 seconds.
• FF: press and hold the Volume + button for 3 seconds.
• Volume: To adjust the volume, press the buttons Volume +
or Volume -, depending on the desired volume level.
APPLER IPODR, IPHONER OR IPHONER 3G
Music can also be played on INTERPHONE F4 stereo by IPHONE
or IPOD devices, if equipped with the specific Bluetooth®
CELLULAR LINER ILINK STEREO adaptor (not included).
3.5 Telephone + Intercom function
With this combination, the connection
to the telephone function takes
priority.
• During a telephone conversation,
interphone communication is not permitted.
• To enable the intercom function, there cannot be a telephone
call underway: press and hold the MFB button for around
3 seconds. An acoustic sound will advise you of connection.
Conversation in intercom mode is full-duplex.
• To end a conversation in intercom mode, simply press and
release the MFB button.
• During an interphone conversation, you can answer or refuse
a telephone call received. Intercom communication will
be interrupted and re-activated automatically at the end of
the call.
• To answer a telephone call, press and release the MFB button.
• To end a telephone call, press and release the MFB button.
• To refuse the call, press and hold the MFB button for approximately
4 seconds.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
3.6 Telephone + Stereo function (A2DP)
With this combination, the connection
to the telephone function takes
priority.
• During a telephone conversation,
the playing of music is not permitted.
• When listening to music, you can answer a telephone call
received. Press and release the MFB button to enable the
call. At the end of the call, music will automatically continue
playing from the exact point at which it had stopped.
• To refuse a call, press and hold the MFB button for approximately
four seconds.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
N.B.: In telephones equipped with musical players, and therefore which
include a Stereo (A2DP) profile, the Telephone + Stereo (A2DP) function
coincides. As such, it may not be possible to connect a further Stereo
(A2DP) player.
3.7 Intercom + Stereo function (A2DP):
With this combination, the interphone
conversation takes priority.
• During an interphone conversation,
the playing of music is not permitted.
• When listening to music, you can make and interphone
call. Press and hold the MFB button for around 3 seconds. An
acoustic sound will advise you of connection. Conversation
in intercom mode is full-duplex.
• To end the interphone conversation, press and release the
MFB button. After approximately 2 seconds, the Stereo A2DP
connection will be restored and music will continue playing
from the exact point at which it had stopped.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
3.8 Telephone + Stereo (A2DP) + Intercom function
With this combination,
the connection to the
telephone function takes
priority.
Before connecting the devices, please ensure that all three
have been used at least once with INTERPHONE F4.
• During a telephone conversation, interphone conversation
and the playing of music are not permitted.
• During an interphone conversation, you can answer or refuse
a telephone call received. To answer, press and release
the MFB button, to refuse press and hold the MFB button for
approximately 4 seconds.
• During an interphone conversation, the playing of music
is not permitted.
• Whilst listening to music on the Stereo A2DP, you can
answer a telephone call received, or enable an interphone
conversation. To answer, press and release the MFB button.
To enable the intercom function, press and hold the MFB
button for approximately 3 seconds. An acoustic sound will
advise you of connection. Conversation in intercom mode is
full-duplex.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
N.B.: In telephones equipped with musical players, and therefore which
include a Stereo (A2DP) profile, the Telephone + Stereo (A2DP) function
coincides. As such, it may not be possible to connect a further Stereo
(A2DP) player.
3.9 Telephone + Telephone (Dualphone) function
This function allows for the simultaneous
connection of two telephones.
• As a call comes in on the second telephone,
whilst a conversation is underway on the first, you
can press and release the MFB button to interrupt the first
call and activate the second.
• You cannot refuse a call coming in on the second telephone
whilst carrying out a conversation on the first.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
3.10 Telephone + Stereo (A2DP) + Telephone function
With this combination,
the connection to the
telephone function takes priority
Here is some info. There was a thread more than 120days ago, so thought I just make a new one :thumleft:
I went to Bike2Bike and asked for assistance with regarding pairing of a few units. As I have a Black Berry and a Ipod and want to listen to music on my Ipod and not have all on my phone.
So spoke to Janet and she said she has the info for me and did all my pairing for me and it works. :thumleft: The info that is below is not all in the manual, as Janet has been playing with these models for some time.
If you have any problems, contact here at B2B and she is very helpful. :thumleft:
If you want it per word doc, send me a PM with email address and I can email it to you!
:mwink: :biggrin: ;D
Pairing 1 Interphone F4 with cell phone, IPOD (with dongle attached) and intercom (another F4)
FIRST : Pair each individual item with the interphone F4 as per instruction manual Page 32 and 33. So Pair the 2 interphones. Turn off both interphones. Pair the cellphone. Turn off Interphone, and then pair the IPOD dongle (while attached to and playing the IPOD).
Put both F4s off.
Disable BT on cellphone.
Put both F4s ON. (slow blue flashing light - NOT paired which is solid blue light).
Play music on Interphone 1 , when music playing hold button on Interphone 2 for 2 seconds.
The music stops and the intercom is on. When finished on intercom, on Interphone 1, press MFB for 1 second only and it goes back to music after 3 to 4 seconds.
Enable BT on cellphone - phone asks do you want to connect to Interphone ? Say YES. (this is phone dependant not all phones are the same, tests done on Blackberry BOLD)
Phone and intercom and music now all active.
To switch between functions…
MFB button:
1 second press on MFB = disconnecting Intercom and replaying music (after 2-3 seconds of silence)
2 second press on MFB = intercom mode on
To take a call, you will hear phone ring in ears if in INTERCOM/MUSIC mode, press MFB once to answer call. Wait till call finished DO NOT end call, wait for caller to put down phone and music/intercom resumes.
Listening to music and want to talk with Intercom, press MFB button for 2 seconds, intercom resumed. When finsihed intercom press MFB for 1 second and music resumes.
Light sequence:
Red blue flashing light = pairing mode
Red light = Switching off
Green light = charging
Playing music from IPOD = slowy rythmically flash on off BLUE
Standy mode = BLUE light flashes every 5 seconds
PAIRED intercom mode= Solid BLUE light
Pairing the Interphone F4:
3.1 Telephone function
To answer a call: as a call comes in, the speaker
produces a warning sound or the telephone’s
ring: to answer, simply press and release the MFB
button.
To end a call: to end a call, simply press and release the MFB
button.
Vocal call: some telephones allow you to make a vocal call
simply by pressing and releasing the MFB button.
To refuse a call: to refuse the call, press and hold the MFB
button for approximately 4 seconds.
To refuse a call in VOX mode, follow the instructions given in
the VOX FUNCTION section.
Volume adjustment: to adjust the volume, press the buttons
Volume + or Volume -, depending on the desired volume
level.
3.2 Intercom function
To enable intercom function: to enable the
conversation in an intercom profile, press the
MFB button on one of the two INTERPHONE
F4s, and hold for about 3 seconds. An audible
warning will advise you when connection has occurred.
Conversation in intercom mode is full-duplex.
To disable intercom function: to disable intercom function,
simply press and release the MFB button.
Volume adjustment: to adjust the volume, press the buttons
Volume + or Volume -, depending on the desired volume
level.
3.3 Stereo function (A2DP)
Use of stereo A2DP profile of the
telephone with INTERPHONE F4:
if the telephone has a Stereo A2DP
profile, it can be used as musical player,
connecting it up to INTERPHONE F4. To enable musical
playing, please consult the telephone instruction manual.
To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
Use of a musical player with INTERPHONE F4:
a musical player other than the telephone, with BluetoothR
technology, can be used: to connect it up, follow the instructions
for the pairing of INTERPHONE F4 and refer to the musical
player manual.
3.4 Music remote control
• Play/Pause: press and release the MFB button
twice.
• Rew: press and hold the Volume - button for
3 seconds.
• FF: press and hold the Volume + button for 3 seconds.
• Volume: To adjust the volume, press the buttons Volume +
or Volume -, depending on the desired volume level.
APPLER IPODR, IPHONER OR IPHONER 3G
Music can also be played on INTERPHONE F4 stereo by IPHONE
or IPOD devices, if equipped with the specific Bluetooth®
CELLULAR LINER ILINK STEREO adaptor (not included).
3.5 Telephone + Intercom function
With this combination, the connection
to the telephone function takes
priority.
• During a telephone conversation,
interphone communication is not permitted.
• To enable the intercom function, there cannot be a telephone
call underway: press and hold the MFB button for around
3 seconds. An acoustic sound will advise you of connection.
Conversation in intercom mode is full-duplex.
• To end a conversation in intercom mode, simply press and
release the MFB button.
• During an interphone conversation, you can answer or refuse
a telephone call received. Intercom communication will
be interrupted and re-activated automatically at the end of
the call.
• To answer a telephone call, press and release the MFB button.
• To end a telephone call, press and release the MFB button.
• To refuse the call, press and hold the MFB button for approximately
4 seconds.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
3.6 Telephone + Stereo function (A2DP)
With this combination, the connection
to the telephone function takes
priority.
• During a telephone conversation,
the playing of music is not permitted.
• When listening to music, you can answer a telephone call
received. Press and release the MFB button to enable the
call. At the end of the call, music will automatically continue
playing from the exact point at which it had stopped.
• To refuse a call, press and hold the MFB button for approximately
four seconds.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
N.B.: In telephones equipped with musical players, and therefore which
include a Stereo (A2DP) profile, the Telephone + Stereo (A2DP) function
coincides. As such, it may not be possible to connect a further Stereo
(A2DP) player.
3.7 Intercom + Stereo function (A2DP):
With this combination, the interphone
conversation takes priority.
• During an interphone conversation,
the playing of music is not permitted.
• When listening to music, you can make and interphone
call. Press and hold the MFB button for around 3 seconds. An
acoustic sound will advise you of connection. Conversation
in intercom mode is full-duplex.
• To end the interphone conversation, press and release the
MFB button. After approximately 2 seconds, the Stereo A2DP
connection will be restored and music will continue playing
from the exact point at which it had stopped.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
3.8 Telephone + Stereo (A2DP) + Intercom function
With this combination,
the connection to the
telephone function takes
priority.
Before connecting the devices, please ensure that all three
have been used at least once with INTERPHONE F4.
• During a telephone conversation, interphone conversation
and the playing of music are not permitted.
• During an interphone conversation, you can answer or refuse
a telephone call received. To answer, press and release
the MFB button, to refuse press and hold the MFB button for
approximately 4 seconds.
• During an interphone conversation, the playing of music
is not permitted.
• Whilst listening to music on the Stereo A2DP, you can
answer a telephone call received, or enable an interphone
conversation. To answer, press and release the MFB button.
To enable the intercom function, press and hold the MFB
button for approximately 3 seconds. An acoustic sound will
advise you of connection. Conversation in intercom mode is
full-duplex.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
N.B.: In telephones equipped with musical players, and therefore which
include a Stereo (A2DP) profile, the Telephone + Stereo (A2DP) function
coincides. As such, it may not be possible to connect a further Stereo
(A2DP) player.
3.9 Telephone + Telephone (Dualphone) function
This function allows for the simultaneous
connection of two telephones.
• As a call comes in on the second telephone,
whilst a conversation is underway on the first, you
can press and release the MFB button to interrupt the first
call and activate the second.
• You cannot refuse a call coming in on the second telephone
whilst carrying out a conversation on the first.
• To adjust the volume, press the buttons Volume + or Volume
-, depending on the desired volume level.
3.10 Telephone + Stereo (A2DP) + Telephone function
With this combination,
the connection to the
telephone function takes priority
