Hi Guys,
I have a full supermoto conersion kit for KTM's it came off my 2009 530, but should fit any KTM dirtbike, spindle size wise, front disk and caliper, no spacers required.
All the parts are KTM powerparts. I used them for a short time to run around townm, but the bike is back in Enduro trim, I like the dirt better.
With this kit you can have a supermoto in less than and hour, bleeding the front brake takes the longest ;D
Here's the available set:
Brake Caliper 4-Piston (Orange) by Beringer https://www.ktm-parts.com/AOMC/product/SMBR/5841301564404
works with standard KTM breake master cylinder
KTM Brake Disc 310 mm Floating Wave Rotor https://www.ktm-parts.com/AOMC/product/SMBR/58609060000
Fits the wheel and caliper with no spacer required
Front wheel - https://www.ktm-parts.com/AOMC/product/PPRTCWA/5840900134430
Rear Wheel with Cush Drive - https://www.ktm-parts.com/AOMC/product/5841000134430
Both Wheels are fitted with Bridgestone pilot powers, balanced and have plenty of life left on them, 120/70R17 Front, 160/60/R17 Rear
The rear fits into the swingarm not touching anything, but it is the widest you can go, both tyres are tubed.
It also includes a KTM 42 tooth rear sprocket, a 15 tooth front sprocket, and the chain.
Supermoto Front fender - https://www.ktm-parts.com/5030801020030.html
Here are some photos - published them on a external link for better reslution
https://www.dropbox.com/sh/o2hbibg8d380amu/AADFJx8l_N3HI5CxzX_XiHQ0a?dl=0#/
I'm in Durban north if anyone is keen to come look at them, just PM me. I can courier the stuff as well at the buyers cost.
R15k for everything, not bad for R25k's worth of kit.
I have a full supermoto conersion kit for KTM's it came off my 2009 530, but should fit any KTM dirtbike, spindle size wise, front disk and caliper, no spacers required.
All the parts are KTM powerparts. I used them for a short time to run around townm, but the bike is back in Enduro trim, I like the dirt better.
With this kit you can have a supermoto in less than and hour, bleeding the front brake takes the longest ;D
Here's the available set:
Brake Caliper 4-Piston (Orange) by Beringer https://www.ktm-parts.com/AOMC/product/SMBR/5841301564404
works with standard KTM breake master cylinder
KTM Brake Disc 310 mm Floating Wave Rotor https://www.ktm-parts.com/AOMC/product/SMBR/58609060000
Fits the wheel and caliper with no spacer required
Front wheel - https://www.ktm-parts.com/AOMC/product/PPRTCWA/5840900134430
Rear Wheel with Cush Drive - https://www.ktm-parts.com/AOMC/product/5841000134430
Both Wheels are fitted with Bridgestone pilot powers, balanced and have plenty of life left on them, 120/70R17 Front, 160/60/R17 Rear
The rear fits into the swingarm not touching anything, but it is the widest you can go, both tyres are tubed.
It also includes a KTM 42 tooth rear sprocket, a 15 tooth front sprocket, and the chain.
Supermoto Front fender - https://www.ktm-parts.com/5030801020030.html
Here are some photos - published them on a external link for better reslution
https://www.dropbox.com/sh/o2hbibg8d380amu/AADFJx8l_N3HI5CxzX_XiHQ0a?dl=0#/
I'm in Durban north if anyone is keen to come look at them, just PM me. I can courier the stuff as well at the buyers cost.
R15k for everything, not bad for R25k's worth of kit.
