Elmer Fudd
Pack Dog
- Joined
- Apr 20, 2017
- Messages
- 193
- Reaction score
- 25
- Location
- Warners, Dirtbin
- Bike
- KTM 890 Adventure R
Either I am doing this wrong or the cruise control is not working on my bike.
Looking at online vids and reading the manual what I understand is the switch has 3 positions.
Left pull = on and off
Down = set speed
Up = reset previous set speed
When active up and down change set speed.
With left pull yellow light illuminates on the display. But then no amount of down or up pressing sets anything. On the Dash still yellow light and text showing cruise at 0kmh. No green light.
Either I am being dense (absolutely possible, wont be the first time) or maybe a sensor not allowing it to engage?
Looking at online vids and reading the manual what I understand is the switch has 3 positions.
Left pull = on and off
Down = set speed
Up = reset previous set speed
When active up and down change set speed.
With left pull yellow light illuminates on the display. But then no amount of down or up pressing sets anything. On the Dash still yellow light and text showing cruise at 0kmh. No green light.
Either I am being dense (absolutely possible, wont be the first time) or maybe a sensor not allowing it to engage?