Ghecko
Pack Dog
The slave cylinder on my bike seems to be leaking and I'm not sure what I should be replacing. The bike tipped over about a month or two ago and since then I've been losing all clutch pressure about every 2 weeks. This happens even faster if I decide to go on the highway - I think the heat/vibration makes it leak more.
Pardon the terminology, but from what I can see is that there are 2 main parts, the first part with the pressure plate inside, and then the second is the body which is made up of 2 pieces of some kind of plastic with a metal brace between them, this brace is what the front sprocket cover attaches to. The leak seems to be coming from between the plastic and the metal brace, although when I took it apart it didn't appear that the platics and metal could be separated.
It's a bit difficult to see if the leak is coming from the bottom of this piece itself, or if it's a bit to the top and the oil is just running to the bottom. Does anyone know what I should be looking at doing?
Pardon the terminology, but from what I can see is that there are 2 main parts, the first part with the pressure plate inside, and then the second is the body which is made up of 2 pieces of some kind of plastic with a metal brace between them, this brace is what the front sprocket cover attaches to. The leak seems to be coming from between the plastic and the metal brace, although when I took it apart it didn't appear that the platics and metal could be separated.
It's a bit difficult to see if the leak is coming from the bottom of this piece itself, or if it's a bit to the top and the oil is just running to the bottom. Does anyone know what I should be looking at doing?